Search results

Bruno Action If Bruno built this as a custom action, my money is on that you are going to have to turn the necks. Did Bruno say what the neck size is ?

? Please explain. Thanks

Recently purchased some shooting supplies from Sinclair. On AccurateShooter they advertise free shipping over $99 with code DSQ. They will not give me this free shipping, my order is over $99 and I submitted this DSQ with order. Has any one else had this problem?

Brandon, appreciate your help. Thanks and Take Care,

Been there, done that. Why don't you check it out and post your findings. Thanks

Thanks Brandon, Do you happen to have the phone number ?

Recently bought a Rem. 700 in 6mm Remington and am trying to find out the year of manufacture. Went to the Rem site and couldn't get it to tell me what I wanted to know. The letters on the barrel are XLFG. Thanks.

Look like BKL Rings. www.bkltech.com

I shoot a 1/8 dot also. But I do not always center it on the bull. I usually set the bull on the horizontal and rest it against the vertical , sometimes on the right side, sometimes on the left, and sometimes on the bottom,sometimes the the top. Whatever is working that day, am I the only one...

A 2 lb. trigger is very easy to get with the original CZ trigger. There are many ways to accomplish this. I would suggest you go to www.rimfirecentral.com and check the CZ thread. An after market trigger IMHO is not needed.

. I have about $800.00 in my CZ Varmint and the best I have shot with in USBR is 241 with 8 X. If I could afford a $2500.00+ rifle I would sure have one. But until then I won't look to shoot any 250's.

I don't know if you could get a 451 for under $400.00. Other choices would be CZ or Savage. Both seem to work well out of the box and both work better with a little tweeking. Mainly reworking the trigger a little. My CZ's, although they are not box stock, can put 5 rounds under a dime,at 50...

Do you post on this forum under a different name? Tried to send you a post on your semi auto rimfire forum, but it was deleated by the host.

Eley Bill, Is this a legit offer, or are you pulling my chain ?

Butches Tuner Weight Butch, just a question I have been wondering about. How do you know how much weight to use as a starting point. I have wrapped a 5 oz. then a 6 oz (not at the same time) wheel weight on the muzzle to see if it would change anything. I know this is not a correct tuner but...

Although it's not one of the 4 main groups, why I don't know, but USBR has a 17 hmr catagory. We shoot at an x ring that's one hundred thousands (.100") in diameter at 50 yards. The 9 ring is about .260".

? There are ten (10) of them listed on the front page of this site ?

In my case I am wondering if the firing pin is vibrating when it hits the primer, causing ignition to change shot to shot. I guess that would have something to do with gunsmithing.

I have a rifle that does it, I always thought it was the firing pin spring.

No, they are threaded. I would assume (yea, I know about assume) that they would be they same thread. Perhaps get in touch with CZ USA and ask them. Take Care.