Latest activity

If you're shooting at a sharp elevation (up or down) you will hit higher than a zero obtained by firing horizontally. Your trajectory...

its about recoil and a mass that is not held in place. might not be an issue in your case, but it will in most centerfire rifles...i...

Thanks Joe; I always enjoy reading match reports from other clubs. Sad, that all MD's don't feel the need to share.

Late. Sorry, Busy... USARB Link to scoresheet: https://scores.national50.net/match_schedule.php Thanks to Tim (Mac1) for...

I drill a hole in the stock to fit the tungsten carbide rod with zero movement. I don't see how it could destroy my stock as I'm...

Please explain that. 🙂

I much prefer to attach the weight to the butt plate and being machinable is a big deal in this regard. I've seen stocks destroyed by a...

my heavy gun for 1000 yd br has TWO 1X1 X3" TUNG blocks..3lbs each, 6 total. i uct grooves in them and glued in place.,,it was for...

my heavy gun for 1000 yd br has TWO 1X1 X3" TUNG blocks..3lbs each, 6 total. i uct grooves in them and glued in place.,,it was for...

I much prefer to attach the weight to the butt plate and being machinable is a big deal in this regard. I've seen stocks destroyed by a...

I use 70/30 or 65/35 copper tungsten alloy rod that can be found on ebay. It's machinable and still almost as heavy as tungsten carbide...

Tungsten Carbide. EBay has every size that you may need.

I much prefer to attach the weight to the butt plate and being machinable is a big deal in this regard. I've seen stocks destroyed by a...

I use 70/30 or 65/35 copper tungsten alloy rod that can be found on ebay. It's machinable and still almost as heavy as tungsten carbide...

I use 70/30 or 65/35 copper tungsten alloy rod that can be found on ebay. It's machinable and still almost as heavy as tungsten carbide...