Search results

Congratulations to the winners! It was a great weekend! Mother nature kept most of us guessing most of the weekend especially The VFS 200yrd. I heard a lot " It should'a went here but it went where I was holding!" including myself! Thanks For posting the results, Mr. Nyhus! and a great...

Carbide Depot sells them.

For those that have quick load! I E-mailed Quick load folks and asked if Accurate LT-30 & LT-32 powder data was included in the latest updates! Got a reply from Renee she said LT-30 & LT-32 not at this time. She did send me the current listing of powders as of Feb 2022.

Try leaving the lathe off! and turn the reamer by hand {if you have a floating reamer holder} turn the reamer ten revolotion for every .001 in feed. take .020 to .025 cut then try using power. If the chatter is on the neck shoulder you can feel it when you turn the reamer by hand slowly! I...

Thanks Mr Nyhus for the history lesson It makes sense to me now! when I got this 220 Swift Norma brass {4Yrs maybe 5yrs ago} I thought it was pretty thin necks compared to other brands of brass in the past I've used. they all have plenty of neck clearance I just assumed quality control issue...

.0133

What a great time! Wayne and the crew at Benchrest Rifle Club of St Louis put on a great score nationals! We had a great time and looking forward to shooting there again sometime! Thank you Wayne! Russ & Brett

Al My box of screw blanks is over 10 years old! Quality control ain't what it use to be...... The #6 screw blanks in the kit I have measure a little fat .141 dia. {#6 screw major dia is .1372 } give Brownell's a call they should be able to check what they have and send you the correct #6...

Al The only thing I've ever found was blank screw kit from Brownell's {2.225 Long shank} you have to thread them yourself but they will work! 080-011-000WB Blank Screw Kit Russ

Randy I just spit my coffee out laughing! My Dad had two phrases he used often: #1 “You can’t hit what you can’t see!” #2 “Do you want to hit what your aiming at? or just go by it really fast!” The way I see It! If you can figure out how to improve on those two phrases. It’s a good thing...

Trxr I have the Pilla panther X6 Post 10 year old style frames. the current panther x7 lens's will work on the old frame. They have an adjustable nose piece {post} to move lenses up & down The 52CHC made by ZEIS lenses are an outstanding all around lens color for trapshooting, benchrest...

Pilla https://pillasport.com/collections/shooting

give stiller actions a call. Stiller's Predator action have a remington bolt clone with 11 degree curved bolt handle. there actions are usually sold out and have to make them when ordered. Maybe they can make one with 18TPI. Never hurts to ask!

Danyboy With all the variations in chamber reamers! I will make myself a case length plug if want to know the actual length the reamer cut or if someone altered the original chamber that was cut! I will trim a piece of brass short then full length size case and insert the plug. Seat the plug...

Andrew looks like a great retirement present! Before you pick out any tooling. spend some time researching on all the different tooling that's available. Here is a link to a whole lot of tooling & information! The Technical Resource section is loaded with information...

TrxR For a 30BR .330 neck! I use .338cal reamer bushing's on a grizzly rod to check chamber neck DIA. For the unkown chamber I use cerrosafe.

Danyboy With all the variations in chamber reamers! I will make myself a case length plug if want to know the actual length the reamer cut or if someone altered the original chamber that was cut! I will trim a piece of brass short then full length size case and insert the plug. Seat the...

For those that have a drill press or milling machine you can try it this way {See Attachment}! My Bat S & SV break at 18lbs in the cocked position is over 25lbs. I remove the firing pin assembly from the bolt in the off season gives it a little less spring compression.. I try to change out...

Wilbur If you have a table saw you can do the 45* cut! {see attachment} If not home depot will have a router and 45* bits Russ

Congratulation's Dean! According to this months Precision Rifleman Magazine Dean Walthers New VFS record is in the record books! NBRSA VFS 200-yd agg: 250-16X's 100/200-yd Grand agg: 500-40X's 500-40X's is a impressive feat to achieve! {When the reality sinks in of only missing the dot 10...