Search results

He has shut off access of to the blog. Many people have noticed and are asking for him to bring it back. Word has it he has quit shooting and is pursuing other things.

More firing pin minutia: In geometry, a spherical cap or spherical dome is a portion of a sphere cut off by a plane. If the plane passes through the center of the sphere, so that the height of the cap is equal to the radius of the sphere, the spherical cap is called a hemisphere. So it seems...

MAC Numbers on my machines does it just fine.

PDF's as requested!

Buried in the depths of BRC circa 2008. http://benchrest.com/showthread.php?49711-New-lathe-setup-for-headstock A PDF from my old files: Pendergraft pivoting spider bolt assy.

Palma Bisley 150 Rule print

http://benchrest.com/showthread.php?88121-For-your-enjoyment-Sir-Charles-shooting-at-200-at-the-2013-WBC-%28article-with-video%29 http://benchrest.com/showthread.php?90045-Speed-loader http://bulletin.accurateshooter.com/tag/world-benchrest-championship/

Yes, you send them dummies with bullets seated exactly the way you want them and they will throat it accordingly with bullets touching lands (if possible). When you get the dummies back they'll likely have blue dye on the bullets and they'll be marked by the lands where they were fitting them.

Palma Bisley 150 rule. The std Bisley 150 rule .0917" lead will give a touch of jump w/FGMM and the std .3435" neck generally has plenty of clearance. Redding dies work well with this reamer if reloading.

Same story. Offered them up for free, sat for months unclaimed. Ultimately went into the recycle bin.

I have a Bison set tru I use on a Rockwell 11" lathe. I use mostly Lyndex collets with it with no issues. Maybe the only downside to this type of chuck is it takes a bit of turning of the chuck key to swap collets. Some people use an adapter in an electric drill. I have a Hardinge Sjogren Speed...

http://benchrest.com/showthread.php?90486-robinett-30-br-trim-lengh

Grizzly is selling a reamer marked Robinett 30 BR that has a chamber length of 1.560".

Royal quit making manual lever collet closers several years ago. If you want one you'll have to find one used. http://www.royalprod.com/product.cfm?catID=3&id=19

This one is free: http://guns.ptosis.ch/node/26 As a download http://guns.ptosis.ch/node/43 or run it directly off the web host http://taran.ptosis.ch/taran.html

Ballistic AE has a target measuring function where you have the option of using a photo of your target.

I posted this years ago and I still pretty much use the same tooling as I haven't found any better and I do own a bunch of Warner tooling: http://benchrest.com/showthread.php?68419-Cone-Breech-and-Crown-Cutting-Tools I use a Warner toolholder (shown below) dedicated for 45° chamfering of tenons...

How quickly were you able to get up to temp with the mapp/oxy? Heating time can be a factor along with ultimate temp. You can kill the flux if you have to heat for too long trying to get to temp. It is usually helpful to get the material up to brazing temp quickly without without lingering and...

There are solder and brazing compounds that both contain silver. The temp range is determined by what the silver is alloyed with. Just because a material contains silver does not automatically make it a high temperature brazing material. Silver solders use ~400-500°F and silver braze ~1200°F...

Looks like an Oehler 43