Search results

Rest Question-Bald Eagle Aluminum Triangle Is the Bald Eagle aluminum triangle rests with windage good for general benchrest use? centerfire and rimfire?,they seem to be priced lower than other rests out there.....thanks in advance

Thats quite impressive linekin,thanks for posting that hopefully others will share their experiences with the H&R 12

I am looking at one of the H&R model 12 target rifles thats for sale locally,are these rifles good shooters?,the owner claims it will shoot .250-.300 average at 50 yards with Eley Black box,it has a Ken Viani scope mount installed and the trigger is adjusted to 5 oz .The rifle looks to be on...

Thanks Tim,anyone use that rod and guide on a 540-X Remington? I just want to be sure the guide that fits the 541-S will fit the 540-X

I am looking to buy a nice cleaning rod and bore guide for a Remington 540-X .22 I believe the same bore guide for the 541 series of rifle will fit this rifle.I like the looks of the IVY rod and Mwerks bore guide but I am open to suggestions,thanks in advance for your input.

Thanks Butch !

Any advantages of either of these crowns on a 22 rimfire?Which is more accurate on average.

Thanks guys.....I shot it and it needs nothing shoots great as is

I have a barrel that has been cut off square at the muzzle with no chamfer at all,just a flat crown if I want to lap this barrel is it ok to just use a brass lapping tool and a hand drill? or should I use some sort of chamfer tool to break the edge a bit before lapping? Any chance of getting off...

Thanks for the reply Joe maybe some of the "smiths" here will chime in with their opinions if they are familiar with this model rifle.

I have been looking at a CZ 455 Varmint model and was looking at some photos of the action and barrel that were disassembled,the barrel is attached to the action via 2 angled grub screws and the barrel tenon has two really deep cuts for the grub screws to secure the barrel to the action.My...

Now I dont know if I should use it nor not,I have JB's and Iosso maybe I should just use that

That's scary......anyone else have this problem? I have not tried it yet.

Hey guys is this stuff good to remove lead and carbon from the chamber and leade of a .22 rimfire? ,Anyone use it?

Will an Anschutz 2013 BR with a tuner and factory barrel compete in benchrest competition?

You are correct factory sporters were the rifles in question

Thanks Bill....hopefully more folks will have suggestions

I have been shooting in a club match that is for factory sporters only,trigger work is all thats allowed,sandbags only(front and rear) or a bipod and rear sandbag you see rifles like 452 CZ's,Savages,Rem 541's etc.Whats the best tecnique to use shooting these type rifles from the bench?Hard...

Thanks for that

Just wondering what is the correct fill for a Protektor bunny ear rear bag,mainly the ears....should the stock touch the bag itself or should the ears hold it up off of the main part of the bag...I have the bottom part of the bag full as I can get it,the base is good and flat still but its full