Search results

Protektor in Galeton Pa tells me that Jim Peightal is handling the Dave Dohrman style bags now..you can order directly through him by calling him at: 724-349-5216

Actually, I prefer a rather flexible bag with bunny ears or mid height ears and no flat. Bob Adamowicz designed that R&M pattern stock in the late 70's and I made a number of rifles on his pattern (which was made of Kevlar). Then when Bob became disinterested, I got his permission to produce...

Very innovative. Jim

Butch Biggest I have seen is about 1.370+.

Lee Keep in my mind that you should keep the two methods separate. Do not try to use a Grizzly or range rod in throat area with a busing on it and also dial in the muzzle end. The range rod and grizzly rod in my experience only work when you do as Gordy describes-otherwise you will be getting...

Jerry Eddie had it right (one thing I have to watch on this MAC is predictive spelling-and how it make save from case is beyond me) Jim

Jerry Yes-had to in order to align with the axis of the bore Jim

Eddie yep-that might work-or a rod that has a ball and socket that is extremely tight fitting like the old floppy indicator rods (not their real name-this aging mind just having hard time remembering their name tonight) Jim

I am still trying to wrap my mind around indicating throat and muzzle and then the pre bore and the eccentricity effects and angular effects-versus a reamer with snug bushing that is following a bore to yield a throat that is concentric over the length of the throat and the bore ahead of it...

Boyd I am well aware of the effect of doubling the length of the rod-but that does not take away the fact that we are inducing strain in the rod. I "grabbed" the tip of the rod with the "end" of the jaws-but that still does not give you a rotary joint. Bob's comments also address that...

I am not intending to "stir the pot" here. Just want to offer some thoughts on a little experiment I did. For giggles and grins I did a little experimenting with the rod method on a barrel with curved bore last night and this morning. One of the things that has bothered about the long or short...

http://www.bozemitchellmckibbin.com/sitemaker/sites/BozeMi1/obit.cgi?user=578457TakanoMD

Turk Very sorry to hear about the passing of Jeanne. You are in our prayers. One small correction to Jim Kelbly's notice. Jeanne's father is George Stickler-one of the long term dependable workers at the South Creek range. Jim Borden

Opened up versus manufactured behave differently Keep in mind that "opening" a ppc coned bolt to 308 bolt face will act differently than a 308 bolt face with coned bolt with extractor already set at ppc height. The depth of the counterbore in bolt face is different-which most often makes the...

Great shooter, great guy and a fun peron to be around.

Condolences to Harlan's family. He was a gentleman and was a good competitor. He has continued to support the Charity Classic with his checkbook even though he has not be in the health to attend. Just an example of the character of this fine man Jim

Rimrock Br actions reliably extract and eject ppc and br cases with 308 bolt face

I know we are all into helping each other in this sport-but actually asking a manufacturer for their drawings so you can make a copy of their product! This is priceless! ;)

Shinny My comment was not about the problem you are having-I was addressing elkhound with his necks curled in at front! Jim

Be careful-sounds like your cases are actually too long for the chamber and you are getting a crimp at the mouth.