M
mr. nobody
Guest
marty i take no offince to that post.
hey wally,
you'll be truthful. look up that ip address. it isn't who tomc is thinking it is!!!
Tuners Spinning Out Of Control
- Thread starter GordonE
- Start date
marty i take no offince to that post.
hey wally,
you'll be truthful. look up that ip address. it isn't who tomc is thinking it is!!!
A
alan k
Guest
If you take a large bell (a ships bell) and you tap it and after it stops ringing you strike it hard do the sound waves travel at the same rate?
Al Kunard
Al Kunard
Joe Friedrich
Member
I believe there's been more than one over there for awhile also.
M
martin hammond
Guest
Derek, gonzo, mr nobody, no offense was intended, it's obvious they needed to wheel out their best and brightest as the wizard of OZ is playing on tbs and the cast couldn't leave the set. martin lol
A
alan k
Guest
It's going to be a LONG winter!
M
mr. nobody
Guest
martin,
it really wasn't me. i was driving a train home when this all happened. i can post up federal proof. i was on a train and i don't have a iphone anymore. you see i fear our government and refuse to buy a rifle that i have to fill papaer work on period anymore. i do face to face perchases anymore and i use a different name for that. i would not and will not use anybodies name but the one i post under. to me that is less than american to be who ever did that is less than american and deserves to to be shot at high noon by the best rimfire has to offer.
it really wasn't me. i was driving a train home when this all happened. i can post up federal proof. i was on a train and i don't have a iphone anymore. you see i fear our government and refuse to buy a rifle that i have to fill papaer work on period anymore. i do face to face perchases anymore and i use a different name for that. i would not and will not use anybodies name but the one i post under. to me that is less than american to be who ever did that is less than american and deserves to to be shot at high noon by the best rimfire has to offer.
M
martin hammond
Guest
derek, i'm just happy you giving the tribe your expertise, they obviously need all the help they can get. problem is it won't be me, their bad behavior resulted in all the tuning threads being pulled. martin
Shenanigans!
Howdy folks,
I would encourage everyone to sign in. Then you will be able to see all of the threads that have been deleted by Martin Hammond. If you are looking at the forum without being signed in, you are missing a lot. Simply look at the month of November. Go back a few pages, the phrase "Thread deleted by Martin Hammond" shows up a LOT!
This is one example of a thread that was going just an few hours ago....
thank you benchresters
Started by martin hammond, Yesterday 06:19 PM Thread deleted by martin hammond
Don't take my word for it, PLEASE SIGN IN AND SEE FOR YOURSELF!
Martin can't delete the fact that he deleted the threads. That seems to stay. He seems to have a standard operating procedure, that eventually involves deleting his posts. Again, don't take my word for it, sign in and see for yourselves. Maybe I read something wrong.
Martin said this:
"their bad behavior resulted in all the tuning threads being pulled. martin"
Hogwash!!!! He pulled his own threads. Again, please sign in, and see for yourselves.
Greg
Howdy folks,
I would encourage everyone to sign in. Then you will be able to see all of the threads that have been deleted by Martin Hammond. If you are looking at the forum without being signed in, you are missing a lot. Simply look at the month of November. Go back a few pages, the phrase "Thread deleted by Martin Hammond" shows up a LOT!
This is one example of a thread that was going just an few hours ago....
thank you benchresters
Started by martin hammond, Yesterday 06:19 PM Thread deleted by martin hammond
Don't take my word for it, PLEASE SIGN IN AND SEE FOR YOURSELF!
Martin can't delete the fact that he deleted the threads. That seems to stay. He seems to have a standard operating procedure, that eventually involves deleting his posts. Again, don't take my word for it, sign in and see for yourselves. Maybe I read something wrong.
Martin said this:
"their bad behavior resulted in all the tuning threads being pulled. martin"
Hogwash!!!! He pulled his own threads. Again, please sign in, and see for yourselves.
Greg
M
martin hammond
Guest
404tbang, you were one of the main reasons the tuning threads got pulled, and that's a right i chose to exercise. lol
Last edited by a moderator:
J
jGEE
Guest
Martin...
I put my Meyers 5C back on my Turbo. It's a .900 x26 inches and this time i used a light 4.95 0z Harrel tuner. I turned down one of my 8.6 oz harrels to 4.95 oz and gave it a try. I'm just now testing and trying to get the slower round the same as the faster..... but you deleted my thread, lol.
I want to go back ad test my .850 Lilja to... but i'm lost without my instructions!!~! homeless in Texas - joe
I put my Meyers 5C back on my Turbo. It's a .900 x26 inches and this time i used a light 4.95 0z Harrel tuner. I turned down one of my 8.6 oz harrels to 4.95 oz and gave it a try. I'm just now testing and trying to get the slower round the same as the faster..... but you deleted my thread, lol.
I want to go back ad test my .850 Lilja to... but i'm lost without my instructions!!~! homeless in Texas - joe
T
tuna921
Guest
S
side-burn
Guest
Agreed. This is just getting to borderline stupidity. I honestly don't know why there must be so many threads with regards to tuners that say the same damn thing again and again...
J
jGEE
Guest
it's winter and it's fun!!
S
side-burn
Guest
I would agree if there weren't so many rude posts attacking people and getting off topic... That, and I go cross-eyed trying to keep up with the tuner topics
Yet, you say others pulled those threads!
I am surprised to see you say that Martin. You have tried to say others pulled the tuning threads. Your were the one who said this:
"don't pull the plug on tuning
last year the threads on tuning were pulled. this along with ammo testing is the most viewed and commented on. clip wings and admonish when needed but do not stop discussion on tuning."
Posted and started in this thread.
http://benchrest.com/showthread.php?72010-don-t-pull-the-plug-on-tuning
Well, I just went and checked that link to make sure it worked, got this message:
vBulletin Message
Invalid Forum specified. If you followed a valid link, please notify the administrator.
So we will do it this way. Posted and started in this thread:
don't pull the plug on tuning
Started by martin hammond, 10-27-2010 09:55 AM Thread deleted by martin hammond
Folks, again, sign in so you can see how much stuff Martin has deleted. It really is amazing. Don't take my word for it, please sign in and see for yourselves.
It is difficult to argue that it is wrong to pull the threads on tuning, and then pull the threads on tuning (along with almost every thread started in a month or so) and try to have credibility.
MARTIN IS ARGUING WITH MARTIN!!!
I pointed out your propensity for deleting threads in the last thread you deleted. I quoted from Tom C. a comment about you putting a book out.
I said this regarding you putting a book out:
"I would buy it, but it would seem like a waste of money, because it would just end up deleting itself."
Apparently, according to you, my post was the reason you deleted the thread.
YOU PROVED MY ARGUMENT!
I stand behind the posts I have made, or I would not have made them. If I have said something terribly wrong, I will correct it.
Please don't try to argue that this is a personal attack. I have posted your own words, which contradict your own words. All comments that I have made are self evident. Let the folks who read this judge for themselves.
Greg
P.S. Gordon, I apologize for my part in hijacking this thread. I have tried to post comments to Martin in his threads, but, well, if he cannot counter an argument, he deletes the thread. Again, sorry.
I am surprised to see you say that Martin. You have tried to say others pulled the tuning threads. Your were the one who said this:
"don't pull the plug on tuning
last year the threads on tuning were pulled. this along with ammo testing is the most viewed and commented on. clip wings and admonish when needed but do not stop discussion on tuning."
Posted and started in this thread.
http://benchrest.com/showthread.php?72010-don-t-pull-the-plug-on-tuning
Well, I just went and checked that link to make sure it worked, got this message:
vBulletin Message
Invalid Forum specified. If you followed a valid link, please notify the administrator.
So we will do it this way. Posted and started in this thread:
don't pull the plug on tuning
Started by martin hammond, 10-27-2010 09:55 AM Thread deleted by martin hammond
Folks, again, sign in so you can see how much stuff Martin has deleted. It really is amazing. Don't take my word for it, please sign in and see for yourselves.
It is difficult to argue that it is wrong to pull the threads on tuning, and then pull the threads on tuning (along with almost every thread started in a month or so) and try to have credibility.
MARTIN IS ARGUING WITH MARTIN!!!
I pointed out your propensity for deleting threads in the last thread you deleted. I quoted from Tom C. a comment about you putting a book out.
I said this regarding you putting a book out:
"I would buy it, but it would seem like a waste of money, because it would just end up deleting itself."
Apparently, according to you, my post was the reason you deleted the thread.
YOU PROVED MY ARGUMENT!
I stand behind the posts I have made, or I would not have made them. If I have said something terribly wrong, I will correct it.
Please don't try to argue that this is a personal attack. I have posted your own words, which contradict your own words. All comments that I have made are self evident. Let the folks who read this judge for themselves.
Greg
P.S. Gordon, I apologize for my part in hijacking this thread. I have tried to post comments to Martin in his threads, but, well, if he cannot counter an argument, he deletes the thread. Again, sorry.
M
martin hammond
Guest
greg, just think about this for 5 minuets........ no one from any applied science has come to bill's defense on barrel vibration/tuning. not one from math, not one from physics, not one from engineering, just think for once. greg the thing about a book is an inside joke... I was prepared to present opinions on stocks,bedding,vibrations, harmonics not from me but from some of the most knowledgeable in their field, and we found it's not worth the agravation. and this involved work from ohio,carolina, california,texas,new york and pa. not one thing from me. but you and a few others made it impossible. martin
Last edited by a moderator:
J
justathought
Guest
How can you pull your threads after having an account suspended. You can't log in. That's an ignorant statement.
M
martin hammond
Guest
redux,madrox,beau. it didn't take John Carper long to figure you out........................ martin
Actually...
Howdy,
Steve, with absolutely no offense intended, that is factually incorrect, some threads were deleted, but not all. I just looked up kathy in the search function here and got a bunch of hits. I still come back and look stuff up sometimes. I will post the following link, you are actually in it.
http://benchrest.com/showthread.php?52274-More-details-Stopped-Muzzle-Calfee&highlight=kathy
Bill didn't delete all of his threads.
Greg
Howdy,
Steve, with absolutely no offense intended, that is factually incorrect, some threads were deleted, but not all. I just looked up kathy in the search function here and got a bunch of hits. I still come back and look stuff up sometimes. I will post the following link, you are actually in it.
http://benchrest.com/showthread.php?52274-More-details-Stopped-Muzzle-Calfee&highlight=kathy
Bill didn't delete all of his threads.
Greg