Search results

OK Did a little research myself. The 25 degree cone to match the bolt head should be enough angle for the bullet tip to slide up into the chamber, by then the body of the case should be supported by the lug area of teh receiver. What do you think? Its a fair angle??? Cheers AI

*HELP*- BAT 3L and 6 Dasher Guys I have myself a BAT 3L 1.365 dual port action which I was planning, and hopefully still planning on using for a 6mmDasher build. The reamer is a 0.272"NK, 0.125FB. Now, here is my problem. I put a case in with a 107MK seated and cycled the bolt in the action...

Thanks guys... still no 100% positive answer yet, but I'll find out before to long! When I ordered my Diamondback action, I ordered it with a drop port large enough to drop a 30cal Dasher case. Then thats all bases covered. So drop port size will be no issue... Cheers AI

Rifle is currently PPC boltface, and a 6mmbr case will not fit it. It needs to be enlarged. When enlarged, will it still drop teh PPC case.... Cheers AI

Guys, yes I could contact Stiller, but I understand his time is precious with the business he runs. I could ask and I know he would answer the question though. Thought someone on here would have tried it... the y would have! I want to open the boltface up on my drop port Diamondback, and...

Guys Curious to know if a Stiller drop port action using a 0.473"(308) boltface will drop a PPC case? CHeers AI

Not to hijack...but.. Guys A few Dasher shooters here on this thread, I am curious as to what freebore you guys are shooting? 0.125"? Cheers AI

Next week I'll get myself some H4350 and remington 7 1/2 primers and see if I can come up with something. The rifle has a 26" barrel, so the velocity numbers should be interesting. If the rifle can get the 107's to 3000fps I will be very happy, and the pressure will be down over Reloader 15 and...

Curious, how much did you achieve getting in there? I may have a go at this! Cheers AI

Ladder test for new rifle chambered in 6mm Dasher a couple of days ago. Came up with 33.3 grains of Varget behind a 107 Sierra. Blanked primer at 33.7 though, so for my rifle this is getting warm at 33.3. Has anybody tried H4350 in the dasher with 100+ grain projectiles. I have been told it...

I have found Reloader 15 @ 33grains with 107's. 33 grains near seem the magic number with the Reloader! Cheers AI

Mate One of my current rifles wears a tracker stock, but for the new project I am chasing a SR BR stock. It is looking like the Klub has it.... unless someone can change my mind! Cheers AI

Thanks Guys... The Kelby Klub does look good and it is looking to be my favourite. The Tom Meredith TMBR on the Kelby site does look good also. It appears to be a larger stock than the Klub? Can someone give me the dimensions from the middle of the tang screw to the end of the forend on one of...

Thanks Guys The Klub was my #1 pick, but i was wondering if any other short range BR stocks out there had longer forends. The reason I ask is that I am wanting to use a Lilja NBRSA HV Taper contoured barrel finished at 28" for a 600yd rifle. I really like the feel of this type of stock better...

Guys Which short range BR stock has the longest forend? Pretty easy question really...... I have no idea to even guess! CHeers AI

I am wanting to use a short range br stock for a 600yd/1000yd benchrest rifle. How do these smaller stocks cope with large diameter barrels? The barrel I am considering is contoured 1.250" for 4", straight taper to 0.940" at 28". The chambering will be 6mm Dasher, so recoil will be low. I am...

Guys shooting the Shehane ST1000 stocks, what rear bag are you using? Since the butt is 0.75" wide, I am curious as to what bag? I am currently using a 3 stitch Protector, but I want on with a little more weight in it! Cheers AI

I am wanting to order myself a Dasher reamer, as I would like a chamber with more freebore than my current one. It will only be shooting the 100 grain plus projectiles, so I would like to utilise the freebore due to this. I am thinking of 0.140 as the freebore, as to get those projectiles away...

On the BRX, I know standard 6mmBR dies can be used as a seater, and neck die, but I remember reading somewhere that a 243AI FL die can be used as a 6mmBRX FL die. Just sizes the body, not the shoulder which you can make the neck die to. Is this correct? Cheers AI

Hi I was just reading the Kelby website, and noticed that it says that the forend is longer on the Klub stock? Just how long is it? I have a SPG on my PPC, and was wondering how the length of the forend compared to it. Could someone measure from the rear of the tang to the forend tip for me...