Search results

I like the thin line........Can we put the record on the bottom? Since we are changing anyway? Can always see 100 and 150yd flags at 200 on sighter target. Windflags closer to record target then too.

Your Gordy rod is picking up the indicated runnout at the location you are testing at. The bore is not perfectly straight (can not gun-drill perfectly straight holes) so as you work gordy rod in it is going to change. Unless your getting runnout without working the gordy rod then you have...

Thanks to all...........Wyatt and I had a great time! Great staff great fun.......Thanks Mark, Dale, Mamma Trutt and the entire gang that makes this happen. Dang those cookies are amazing! Wyatt says ................Wayne and Andy are well developing "corn-holio's"

Thats a special talent Jack! Fine shooting all

I make many.....cnc cut to your fired case

What bushing for a .262 neck? Any explanation on your findings?

Wyatt and I may be able to come again this year..........:cool:

Jack remind me......Wyatt and I look forward to it Jeff

This works on a BAT to check primer peircing depth 1. Unsized case - un-loaded case - safe area 2. kill primer with WD-40 or kroil 3. place case in chamber and slowly close bolt while depressing trigger 4. measure bolt shroud/firing pin fall while firing pin resting on primer using caliper...

Thanks to all at the range for making it happen. Had a great time, food great. Thanks again Mark, Dale and gang

ditto.....328 loaded, 330 NK

Do you use a solid carbibe boring bar for turning chambers? Also, what corner radius on the tip? Do you think the finish is up to par with reaming a chamber? I have cut a few 6mm PPC this way but using a roughing and finishing boring bar going down to .230 diameter gets a little fussy...

Plastic......a great description for the fouling that occurs with XBR. Seems like Butches does better at removing it too. You can really feel it with a bronze brush for 1 to 3" past the throat. Don't let that plastic sit between shoots, else, you will get a big one. Not the "One" you want...

I think its important to get the chamber aligned and indicated to the best of our abilities, however, there are so many other variables.....I agree 50 millioniths thing is over-rated and not practical. Here is a neat one involving making a fire-form barrel. I have taken what I thought was a...

Another Method . . This seems to work and really averages out the bow, runnout, and the nucences in the barrels: Please note: I have a Proto-TraK CNC Lathe that has a long spindle bearing area - I cannot indicate the muzzle end of a 34" barrel by sticking it through the lathe. This has some...

Thanks Andy for the props......Harley times are tough and you never made good on that bet with this 12 year old. Maybe before Christmas u can pay up! LOL Wyatt Peinhardt

Lord Help USA.......Jack keep the group in control over there! LOL Jeff

Guilty

Contact me....I'll make you a die to solve your problems

Shooting was tough......Not as tough as those Charlie Horses Dale!:D Wyatt P