This might be the nicest entry level lathe I've seen to date......
Coming Soon a Large Bore PM1127VF Lathe. Comes standard
with a 1-1/2" spindle bore and 6" Chuck. PM1127VF-LB Lathe
$2249.00. Free Shipping!
Page Title
Main Features:
* Made in an ISO 9002 Certified Factory
* High Quality Electronics Used Throughout Machine for long term reliability
* POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT LEFT HAND THREADS TOO
* Super Smooth and Quiet running machine
* Large Spindle Bore 1-1/16"
* HEAVY Welded Steel Machine Base for extremely rigid cutting
* Heavy Duty Bed Width 7"
* Variable Speed 120 Volt Single Phase Main Motor, 1hp
* Variable Spindle Speeds From 50-1800 rpm
* Inch Threads and Metric Threading, Right and Left Hand
* Spindle is Dynamically Balanced, Hardened and Precision Ground
* Spindle is Supported by High Precision Tapered Roller Bearings
* All Gears and Shafts are Hardened and Precision Ground
* Guideways Induction Hardened and Precision Ground for long life
* 2 Year Warranty for Parts
* INCH LEADSCREW AND FEED SCREWS for Even, Easy Measurements
* Digital Speed Readout on Face of Machine
Main Specifications:
* Distance Between Centers 27"
* Max. Swing over Bed 11"
* Max Swing is Gap No Gap
* Width of Bed 7"
* Spindle Mount/Bore DIN 55021
* Spindle Speeds, Infinitely Variable 50-1800 RPM
* Leadscrew Pitch (Main) 8 TPI
* Longitudinal Feeds 0.0025-.012 IPR
* Cross Feeds 0.001-.0056 IPR
* I nch Threads 52 Threads 8 to 56 TPI
* Metric Threads 45 Threads 3mm to .5mm Pitch
* Travel of Cross Slide 5-1/2"
* Travel of Compound 2"
* Tailstock Quill Travel 3-1/2"
* Tailstock Taper MT#2
* Main Motor 1HP Variable
* Machine Weight 650 Pounds
* Power Requirements 120 Volt 1 phase
Standard Equipment:
* 40 Position Quick Change Toolpost
Set with Holders
* Live Center
* 5" 3 jaw chuck
* 5" 4 jaw chuck
* 9" Face Plate
* Thread Chasing Dial
* Steady Rest
* Follow Rest
* Complete Stand/Base for Machine
with Cabinet Doors
* INCH and METRIC THREADING
* High Quality Electronics
Coming Soon a Large Bore PM1127VF Lathe. Comes standard
with a 1-1/2" spindle bore and 6" Chuck. PM1127VF-LB Lathe
$2249.00. Free Shipping!
Page Title
Main Features:
* Made in an ISO 9002 Certified Factory
* High Quality Electronics Used Throughout Machine for long term reliability
* POWER CROSS FEED, BOTH IN, OUT, and LEFT and RIGHT, and WILL CUT LEFT HAND THREADS TOO
* Super Smooth and Quiet running machine
* Large Spindle Bore 1-1/16"
* HEAVY Welded Steel Machine Base for extremely rigid cutting
* Heavy Duty Bed Width 7"
* Variable Speed 120 Volt Single Phase Main Motor, 1hp
* Variable Spindle Speeds From 50-1800 rpm
* Inch Threads and Metric Threading, Right and Left Hand
* Spindle is Dynamically Balanced, Hardened and Precision Ground
* Spindle is Supported by High Precision Tapered Roller Bearings
* All Gears and Shafts are Hardened and Precision Ground
* Guideways Induction Hardened and Precision Ground for long life
* 2 Year Warranty for Parts
* INCH LEADSCREW AND FEED SCREWS for Even, Easy Measurements
* Digital Speed Readout on Face of Machine
Main Specifications:
* Distance Between Centers 27"
* Max. Swing over Bed 11"
* Max Swing is Gap No Gap
* Width of Bed 7"
* Spindle Mount/Bore DIN 55021
* Spindle Speeds, Infinitely Variable 50-1800 RPM
* Leadscrew Pitch (Main) 8 TPI
* Longitudinal Feeds 0.0025-.012 IPR
* Cross Feeds 0.001-.0056 IPR
* I nch Threads 52 Threads 8 to 56 TPI
* Metric Threads 45 Threads 3mm to .5mm Pitch
* Travel of Cross Slide 5-1/2"
* Travel of Compound 2"
* Tailstock Quill Travel 3-1/2"
* Tailstock Taper MT#2
* Main Motor 1HP Variable
* Machine Weight 650 Pounds
* Power Requirements 120 Volt 1 phase
Standard Equipment:
* 40 Position Quick Change Toolpost
Set with Holders
* Live Center
* 5" 3 jaw chuck
* 5" 4 jaw chuck
* 9" Face Plate
* Thread Chasing Dial
* Steady Rest
* Follow Rest
* Complete Stand/Base for Machine
with Cabinet Doors
* INCH and METRIC THREADING
* High Quality Electronics