Newbie needs advice

NORMA........... The Norma 6ppc brass I have just tried in a new Krieger was about .002 short on head space... So it'll work in most ppc chambers, just a touch a head space on that first shot... Now.... It's neck diameter, unless you have (find) a no turn .272 neck or so....

You might also want to check the Norma case head diameter, just above the web. I haven't measured any of the new cases, but the old ones were about .0025 to .003 smaller than the Lapua .220 Russian.

So if, for example, your chamber reamer was set up to have .003 clearance at the head with Lapua brass -- and many were -- you'll now have close to .0055 clearance. May or may not matter to you.
 
Just a suggestion

Purchase Mike Ratigans book and it will take you through all of the items you will require and why.
Go to Sinclair International and request a catalog. For the most part they have everything you will need and with pictures. Highlight items of interest like a rear sand bag and come back or ask others which type you will need, big ears, small ears, etc. Go through the major items first then progressively wind down.
Through the process of comparison and elimination you will be able to minimize what you NEED and only purchase what is required. Don't ask me how I know this. :eek:
Welcome to precision shooting. A good first piece to look for is a 3 drawer mechanics tool box. :)
Centerfire
 
i'm sure you could reload , by hand, 50 rounds in less than an hour.

Seems a pretty safe bet. When at a NBRSA group match, there is a minimun of 1/2 hour, after you leave the line, before you can be called back to shoot. Often enough, that 1/2 hour is all the time there is, too.

Most people reload, clean the rifle, chat, smoke, have a coke, take a leak, visit the target area, whatever in that half hour. As for reloading -- likely be around 10 rounds to reload. Most of us soak the bore, then reload, then finish cleaning, then attend to whatever else needs attending to. Don't think I ever spend more than 10 minutes reloading between targets, usually less. And that's outdoors, at a match, using portable equipment.

Except for the strain of getting use to reloading at the range, and I suppose transporting everything, one notion new shooters might consider is to only load at the range. Good training, and less wasteful if you want to test something.

Even for a score match, I often load at the range, because the week before was just too hectic, or I didn't have enough cases ready, or some other damn reason... Once in your repertoire, loading at the range is no big deal.
 
Reloading 101

Thanks for the advice...I have a LV 6PPC rifle on order and I am in the process of getting the reloading tools bought.

I plan to buy the brass prepped by Hoehn.

I am considering buying Redding series S dies with a neck sizer w/ three bushings, body die, and bullet seating die with an integrated micrometer. Are these the dies I need for reloading at home ? Don't want to load at the range for now.

Also looking at the Forster case trimmer, Harrel 60 gr powder measure.....haven't picked a press yet.

I would appreciate feedback as to these products and recommendations on other tools I might need.
 
I am considering buying Redding series S dies with a neck sizer w/ three bushings, body die, and bullet seating die with an integrated micrometer. Are these the dies I need for reloading at home ? Don't want to load at the range for now.

The Redding S >FL< bushing die and in particular the Small Base version..... The press is not too important... But a good RCBS partner press is very portable and will provide plenty of leverage to size your brass..

Also looking at the Forster case trimmer, Harrel 60 gr powder measure.....haven't picked a press yet.

I would appreciate feedback as to these products and recommendations on other tools I might need.

A good set of Wind Flags.............. Imperative to Precision and Accuracy...

southj, congrats on your decision... You will have a TON of fun shooting little groups with your new rig..!

cale
 
Back
Top