jackie schmidt
New member
I have Dave Kiff grinding me a new 30BR reamer with one modification over the Robinette zero freebore we have now.
Randy's reamer is designed to be used with cases that are made into the 30BR by necking up the standard 6BR. The result is a case that has a length of about 1.525, quite a bit shorter than the originol 1.560.
We found that by making the cases by blowing them out, the result is a case with a length of about 1.545.
So, I am having Dave Kiff grind me a reamer to be used with a case that is made by blowing them out, rather than necking them up. The reamer length will be 1.550.
I should have it in about ten days.........jackie
Randy's reamer is designed to be used with cases that are made into the 30BR by necking up the standard 6BR. The result is a case that has a length of about 1.525, quite a bit shorter than the originol 1.560.
We found that by making the cases by blowing them out, the result is a case with a length of about 1.545.
So, I am having Dave Kiff grind me a reamer to be used with a case that is made by blowing them out, rather than necking them up. The reamer length will be 1.550.
I should have it in about ten days.........jackie