I reposted this here (from an earlier post by Ian Owen) because now is the time that Jim Kelbly is setting up the bench assignments and it may do one good to make sure they understand the dynamics of the flag rotations at the Super Shoot. Also, I believe that most experienced shooters would agree that the only time that we ever see a disagreement (and sometimes a fight) at a benchrest match is when the flags are being set. (At least that's the only time that I've seen a fight at one.)
When one invests several thousand dollars in five sets of flags and offers to have them shot over (and very often shot at), there is an expectation that those will be the flags used on that rotation. That's the convention that has developed at the Super Shoot over the past thirty-plus years.
The other shooters who ask specifically to shoot on that person's flags are expecting to use that specific type of flag. Those shooters number between twenty to thirty at the Super Shoot. When one other guy decides to set another type of flag OVER those of the flag sponsor on the SAME bench rotation, it affects quite a few other shooters; not just one. Most of the other shooters who are placed on that flag rotation get very upset when someone else unilaterally decides to put their flags on that rotation, TOO. It usually gets a little ugly.
I offer to use (and unfortunately have abused) a flag rotation to shoot over not only for myself, but also for the other twenty-plus shooters who ask Jim Kelbly to place them on my rotation so they can shoot over this specific type of flag. (I get several shot every year and they are not cheap to replace. A flag is $50 and the stands go for up to $100 each. Do the math for 25 to 30 flags.)
I will be using Smiley flags with pin wheels on the rotation that I am sponsoring. I intend to set them straight down the middle of the lane and staggered only for height. And I also intend to attach the tails on the bottom of the paddle and ensure that they don't flip up into the line of flight of the targets on either side of me.
If you don't wish to shoot over that type of flag and set-up, PLEASE ask Jim to place you on a bench rotation that has the type of flags that you like to use. It's only common courtesy.
When one invests several thousand dollars in five sets of flags and offers to have them shot over (and very often shot at), there is an expectation that those will be the flags used on that rotation. That's the convention that has developed at the Super Shoot over the past thirty-plus years.
The other shooters who ask specifically to shoot on that person's flags are expecting to use that specific type of flag. Those shooters number between twenty to thirty at the Super Shoot. When one other guy decides to set another type of flag OVER those of the flag sponsor on the SAME bench rotation, it affects quite a few other shooters; not just one. Most of the other shooters who are placed on that flag rotation get very upset when someone else unilaterally decides to put their flags on that rotation, TOO. It usually gets a little ugly.
I offer to use (and unfortunately have abused) a flag rotation to shoot over not only for myself, but also for the other twenty-plus shooters who ask Jim Kelbly to place them on my rotation so they can shoot over this specific type of flag. (I get several shot every year and they are not cheap to replace. A flag is $50 and the stands go for up to $100 each. Do the math for 25 to 30 flags.)
I will be using Smiley flags with pin wheels on the rotation that I am sponsoring. I intend to set them straight down the middle of the lane and staggered only for height. And I also intend to attach the tails on the bottom of the paddle and ensure that they don't flip up into the line of flight of the targets on either side of me.
If you don't wish to shoot over that type of flag and set-up, PLEASE ask Jim to place you on a bench rotation that has the type of flags that you like to use. It's only common courtesy.
Last edited: