Search results

Thanks Thank you Jerry. Centerfire

A barrel Liner? I would be interested in knowing everyone's thoughts regarding reboring and installing a new barrel liner of appropriate caliber. comments? Centerfire

Dillion Precision Try the Dillon site, they have various boxes for sale. Centerfire

Have you checked at Bruno's Just thought they might have what you want. Centerfire

Just a thought Matt, You might try a round, flat piece of plastic a bit larger in diameter than the bottom of the cup. Try finding an o-ring to put below this piece of plastic to keep it from going concave. Centerfire

Check this out I am looking at my glued in Panda action in my stock. If you take the bolt out and look at the area where the top lever of the Jewel trigger pokes through the receiver you will hopefully notice a small rectangle about .060" more or less that is the first thing you should see...

question Have you taken the barrelled action out of the stock yet? Centerfire

Berger web site Bill, I looked up the following: 120 gr 1 in 9" twist or faster 130 gr 1 in 8" twist or faster 140 gr 1 in 8" twist or faster Hope this helps. Centerfire

From what I remember I don't remember the Cast process but the Calender process involves a very large (tall) and wide continuous running process. A very long line after the calendar. The vinyl is mixed dry powder in a separate machine where color powder is added, along with several liquids that...

Where does one start Thanks to all for the input. Much appreciated. Centerfire

A good friend of mine has a Ruger No.1 in 6.5 Creedmore. He has purchased a Harrell Tuner/ Brake for it to be installed at his gunsmith. No instructions with the tuner. Do you start at zero on the tuner or do you start somewhere higher and then go one way or the other? Tried the search function...

For what it is worth Is your neck turning mandrel matched by the same manufacturer as the mandrel on the neck expanding die? Sinclair actually mentions this in their catalog under 'Sinclair Stainless Steel and Carbide Mandrels. "Turning mandrels are sized .002" under bullet diameter and...

Thank you Thanks for locating this for me. I tried Brownells twice and they did not know what I was talking about. They have taken it out of their Sinclair Catalog. Centerfire

I was at the range yesterday speaking with an AR15 competitor that needs that rear iron sight with the fresnel lens to allow the front sight and target to be in focus together. Sinclair used to have in catalog but the say they don't carry any more. Anyone know who is selling them now? Thanks...

Couple of questions What is the spring weight for a new spring for my Panda? I ordered a mainspring changing tool from Sinclair to solve this problem. What pins etc. might I need to replace/order that holds the firing pin assembly together? The Sinclair you tube video shows the tool but does...

You know you always wonder about a companies warranty policy, for their products, especially one that just says "Just send it back" if you have a problem. Well my Harrell's BR Powder measure developed a problem and was not allowing smooth rotation of the knob after 10 years of use, so I called...

Possible sources TopBrass.com PolyGunbag.com Centerfire

Just thinking, Boyd Not sure now but since this knob lengthens the bolt handle it might come back and hit your trigger finger if the rifle has a sufficient recoil.:eek: Just not sure unless I had one to check out. Centerfire

Just a suggestion If the point section on your vertical rod will allow, cut the point portion off and drill and tap for a cone point socket set screw. maybe 3/8" to 1/2" long. The steel is hard and will last a long time and if you have a problem just remove and replace. You could use a Hex...

I just had to know, Your question regarding a 6mmPPC Wilson chamber bullet seating die and a 6mm ppc Oversize die piqued my interest so I wrote to Wilson. Today I received their reply. LE Wilson Co. Customer Service, June 29, 2015 8:33 AM "The oversize was designed to be used with SAKO...