Search results

Good point. Scrubdog, what is the proposed chambering?

No John, we mostly get them in the underwear.

Chiggaway works.

Would a tight fitting roll pin be a better choice here?

Looks fine to me.

"They say one in twenty-four wrecks in NC are associated with a deer." It's probably because they can't grip the steering wheel very well with hooves.

"Also, as Indiana said, shoot some jacketed rounds after the lead. It will take a lot of the lead out." This has never worked for me, it just makes it harder for me to see the leading with the naked eye. It seems to press the lead deeper into the grooves & make it harder to remove. Take a...

"Would that lead one to conclude that the only reason the heavier bullet might fail to stabilize over long ranges when launched from the .223 is because of the lower muzzle velocity?" No, the difference is length of the bullet.

Did it work?

"Anyone know where to get to extractor springs ??maby a Wolf Spring co. part # ????" Measure the diameter & thickness of what you got & call Brownells. They have spring stock that you can cut to length.

Marty left & mr nobody has laid off the sauce.

I am sorry for your loss.

Do you have the capability to bush the bolface/firing pin?

"Is the Ruger action worth putting a new barrel on or should I forget about the Ruger?" It wouldn't be to me. I would.

"Is it that the stressed metal changes, inconsistantly, the way the barrel vibrates?" Yep, probably the way that the whole rifle vibrates. Also if the action is torqued, the head space at the rim will be a few thousands different than the way it was originally. I.E.: slightly wopperjawed...

Check with Tom Meredith.

Ron in VA "One is an integrally suppressed, and the other has a 16 inch threaded barrel. " How is the accuracy, suppressed vs. no suppressor on the threaded bbl?

it's a varient of the .222 mag.

Montana Pete, It's called ..... ....free enterprise. Are you forced to shop at only one place? Do you have a job? Does the company that you work for make money? If you can afford to work for less money, should you? By your logic, are you price gouging your employer?

Mr Salt, "...I have said this before to a few, that if you head space of the shoulder this is what you will eventually end up doing, anything with belts need to be head spaced of the belt. " "Tod, the Go Gage is .217 and the no-go is.221 if that helps. All I know is Rick Picceretta told me...