Search results

do you have this trigger in your possession?if so does it have the set trigger and safety option? the 40-1S fits 721/722/725 /40x and should also fit 700's so if yours doesn't have the set trigger but a safety lever it still shoud fit above models

i have seen a couple of 700 extractors in the 722 bolt face,i think the 700 extractor may be a little high to fit the raceway,but you may be able to very carefully file it down to fit the raceway? what size bolt face are you needing as the .378(222 size)? are still around,the hard ones to find...

they are a bit hard to install without any tools,as they are so small,helps to remove the ejector,don't let the spring and ejector come flying out

try spearfish gunsmithing(605)642-3385,a good guy dennis martin,think that info is still correct, if that fails call howard dietz(830)885-4662,he may have one if you can talk him into mailing it. they are going for around $25 a guy in new mexico lists some on occasion on gunbroker,but nothing...

not sure about a fix i was cautioned to support the back side of the trigger with a block of wood or something to avoid your problem when driving out the pin,mine went ok,but don't know if there is a easy fix.

extractors work the rivited one may not pick up the case,never tried it on a ppc?

bolt with anti bind slot jackie,the new 700 bolts will work on the 721,which is what he wants to do,now the 721 bolt won't work on the newer 700 action with the anti bind slot,but guess a slot could be milled in 721/722 bolts to work in the newer 700 actions,never tried to do it??

yes n/t

scope my choice would be the nikon

scales Was a discussion several days ago,and the Jennings got lots of good comments,they have a web site,and you can do a search on electronic scales on here and see if the thread comes back up? terry

1993 suffix A on down the line bob they don't use some letters,so look at the other posters list

yes with some modifications if the 722 has the rear factory sight boss,you will need to fit it in the barrel channel,the wood at top of safety lever will need to be cut down a bit so the lever will operate and if you don't use the 70 bottom metal,then you will need to do some fitting on the...

243 problem First thing,you are probably using one of the worst bullets to get to shoot very well,i know some people have good luck with them,but i shot a box in various 6mm/243 and only had a krieger barrel that shot them well ,your twist is fine,i shoot the 105 v-max in that twist.Two...

rechamber ? if this is on a short action,the 30/06 will be too long to work thru the magazine,and if you shoot it single shot the loaded round won't eject out the action opening

anyone adjusted the trigger on these?if so what screw adjusts what?don't have an owners instruction book,may not address it anyhow. thanks for any info

thanks butch i just posted over ther,so maybe somone can help

Any of you gunsmith ever work on one or have any advice with this problem? Short story,friend had Tip Burns rebarrel his(Tip did a very good job)anyhow shortly after receiving the rifle the bolt comes uncocked when extracting/ejecting a round,only way to get the bolt back in action is to hand...

tip burns butch,tip lives at canyon lake,a long way from houston ,if he wants a local houston gunsmith

rem primers not sure if that's your only problem,but as you have discovered the hard way,tne remington primers are a little bit on the small size,diameter wise.they handle cratering fine,but i don't use them in brass that has been fired more than twice.CCI & Fed.are the largest diameter in my...

seater problem i think matt is having issues with his seater which i don't think has a bushing in it,i think you are giving instructions for a sizer with a bushing