Search results

Does anyone make a cutter for a lathe that can cut the rim and the extractor cut at the same time to take 30 BR rim down the 6 PPC rim size? Thanks John Shoerjbh10@yahoo.com

Does anyone make a cutter for a lathe that can cut the rim and the extractor cut at the same time to take 30 BR rim down the 6 PPC rim size? Thanks John Shoerjbh10@yahoo.com

Tuner Larry Leave your tuner on the barrel while working up loads, you want to work up loads with the same weight on the barrel that you will be shooting. Stand in front of your rifle turn your tuner all the way back toward the breach then work up loads the same as if you didn't have a...

Hi Could some one please help me with a problem. From time to time when I try to open different ads and informational sites I get this administrative box that pops up and I cannot continue. Help please Thanks John shoerjbh10@yahoo.com Welcome Site Administrator / User Administrator Select...

Bearing surface comparator I was wondering if anyone is using the David Tubbs or the new Sinclair bullet sorting stand Better yet has anyone had an opportunity to do a comparison? Also if anyone has used the new Sinclair bullet sorting stand, will it raise high enough to allow you to check...

Are there any clubs in Pennsylvania or Maryland that have F class matches? Thanks John

I am looking to buy couple soft gun cases for my bench rifles. With 3 in. wide forearm and 30 in. barrels Any suggestion or recommendations The one that's caught my eye so far is the Allen Euro Oversized Scoped Rifle Soft Case. Thanks John

Skeet In responses to how well the cases form. I checked my with a concentration to gauge after fire forming.They were all within 2th. I knew basically what load I wanted to shoot in this particular rifle I started with test load's 31, 31.5, and 32 to grains of Varget. First firing of...

Skeet In response to question about fireforming cases for 6mm Dasher. Recently I had one of my rifles Rebarreled to a Dasher. I fireformed 55 cases with absolutely no problem. I did not create a false shoulder My rifle has a .269 neck, I turn the necks down to .2665 Made all length equal...

I am building a new practice range at my house. I will primarily be shooting IR 50-50. Should I make the range 50 yd. or 50 meters long??

Date Is the shoot July 17 & 18 Or July 18 & 19

How can I purchase the raffle tickets if I'm not attending the shoot? I would like to purchase two of them. Thanks John

In anticipation of my new front rest, I ordered an Edgewood front bag. It showed up this afternoon and I was wondering should it be filled with heavy sand or light sand ? And how full should I make it?

In anticipation of my new front rest, I ordered an Edgewood front bag. It showed up this afternoon and I was wondering should it be filled with heavy sand or light sand ? And how full should I make it?

Thanks for the phone #

Does anyone have any suggestions of motels and possibly phone numbers, you could recommend close to the Bridgeville Range? Thanks John

I am looking to buy new rest and was wondering Has anyone used a John Loh and a Fulgham rest that could give me a comparison of the two for Rimfire and/or Centerfire Benchrest competition? Thanks

Are the windage adjustable rests easier and more precise to deal with, even though their slower than Coaxal?? For many years, I used a standard front rest. and shot very well as a bags squeezer. Then came the windage adjustable top's and of course I had to have one. I purchased a bald eagle...

Coaxial top Hi Butch I use one of your tops, and love it I have been shooting competition from 100 yd. out to 600yd for the past couple years . and have had no problem. It just so happens last month , I decided it wanted to play the rimfire game a little bit. I was invited to my local club...

RStiefel That was the correct Brackney, and correct phone number . thanks John