Search results

Thanks for the info. New emblem ordered.

I'm working on a stock for a Ruger #1, Stainless laminated rifle. The pistol grip cap needs to be removed and it looks like I need to cannibalize the Ruger emblem that is embedded in the cap. Is destroying the emblem necessary? Can I get a new emblem from someone? PFA only, not actual cap.

I have an extended mag box in the rifle from Kevin Wyatt and have it altered so I can get third round down Never heard of the center feed mag boxes. Will be looking at his website today

Do you have a pic of this? Or, do you have a pic of a 40X repeater?

OK, relax, I hear ya. LOL!! Was not planning on wallering out the bottom of the chamber. But... I was planning on removing the barrel and cutting a slight 30 deg. bevel and polising it nice and smooth.

No feed lips 700 with BDL bottom metal

I have a feeding problem in my 7shortmag My guess is that it is hitting the corner of the back end of the cahmber, right in front of the bolt nose. After the loaded round stops feeding, if I back the bolt up just a bit, I can feed the round the rest of the way in to the chamber. Has anyone else...

Well guys, I've got it pretty much figured out. Disclaimer: I am not being ungratefful for all the help and suggestions. Just the opposite....... I thank you all. Installed bushing in bolt to much tighter tolerances today and re-cut raceway for Sako claw. No good. Tried my billet claw. No...

Finished product

More pics

OK, they may not be cost-effective, but it is very satisfying to make a couple. I may sell them, $857.42 ea. Free shipping. More pics to come as work progresses

What do you recommend for bushing I.D.?

I did the same thinig. Made a form tool and rebated all my case heads to PPC specs. Found out a coupla' years later that it was not necessary. Oh well. I'm running two Panda actions

There is .011" of linear trave in the bolt.

Generally speaking. Yes. For 90% or better of the time

I can't find a Large Sako hook in stock anywhere so I ordered one from PTG. It's going to be several weeks for delivery though. Maybe I will make up a couple out of Tool Steel on the CNC, not sure though. Does anyone have a Large Sako hook that you would part with? Will most likely sweat a new...

Bolt nose clearance? Explain please. Do you mean inside the tenon on end of barrel? I sent you a PM Do you think I should cut the ring off the bolt nose and sweat a new one on?

C'Bore depth .140", C'bore dia. .546"

Sure, gimme a few minutes. Something else, don't know if it's a problem or not. The bolt nose was not replaced, it is original and it is not "round" it has irregular cuts in the I.D. to accept the factory extractor

The problem is that when the case mount (empty case) or when the bullet (loaded round) clears the ejector port, the case falls back in to the receiver