Search results

That would be Hank Johnson (Congress D-GA). https://www.youtube.com/watch?v=bs23CjIWMgA

Thanks Bart

I use a razor blade. Get the angle right and it will roll right off. I've done quite few this way and never had any problems. Finish the tight spots with sand paper, fill in the seams and low spots, prime and paint. Learned the razor blade trick from Briar Hail.

Thank you for posting the results Gary.

Good shooting Clayton! Thanks for the results Greg.

Nice shooting Ted.

Thanks for posting the results.

Thanks Tim. Nice targets!

Thanks for the report Jeff, it's greatly appreciated. Scott

Thank you Wilbur.

Thanks for the update Bart.

Thank you for the results. Scott

Matt, Thanks for posting the results. The conditions were challenging, but still had a great time. The range is definitely going through some major changes. It should be a great place to shoot once it is all completed. Thanks again to everyone at Holton.

I guess you could use a very LONG handled brush and a garden hose, but I think I would just leave a bar of soap and a brush on the ground and hope for the best :) Seriously, if you want to polish it without removing it from the stock, I would use "California Custom Purple Polish". I used to...

Check your PM

Good shooting Tim.

That's some mighty fine shooting Rich, congratulations! Scott

Looks as if you have the airbrush thing figured out. Nice job!

Duane Thank you for the results. It's greatly appreciated by those of us who could not attend. Scott

This is copied from Widener's site. "SMALL RIFLE 223 (part # QQQSR223) NEW NEW This is the newest primer available in the Wolf line. It is ever so slightly hotter than the small rifle magnum primer and it comes with a brass colored thick cup. This primer can be used in place of the SRM...