Targets

T

Tim Boettcher

Guest
I deleted the last threat, I thought I was deleting an attachment. I will put the attachments back up.
 
Last edited by a moderator:
Here is more....
 
Last edited by a moderator:
Tim, sorry for not getting back sooner. Holiday weekend kept me busy.

When I took the targets to the range I found it a little difficult to see them (The .5", 1" and 1.5" w/ 9 ring)

Something that might help would be to color the area between the 10 and 9 ring as solid red.
Maybe the scope could pick them up better and the red would allow seeing the bullet hits.

Thanks, Andy
 
AndyTaber said:
Tim, sorry for not getting back sooner. Holiday weekend kept me busy.

When I took the targets to the range I found it a little difficult to see them (The .5", 1" and 1.5" w/ 9 ring)

Something that might help would be to color the area between the 10 and 9 ring as solid red.
Maybe the scope could pick them up better and the red would allow seeing the bullet hits.

Thanks, Andy
Click to expand...

PM sent
 
Feel free to use the following load development target. Best thing to do is get a ream of card stock and start printing.
 
DSM said:
Feel free to use the following load development target. Best thing to do is get a ream of card stock and start printing.
Click to expand...

That target is huge! What size is the inner circle supposed to be?

BTW the actual size of the target in the file is 35 1/4" x 35 1/2"


The screenshot is from the dimensions I found on the net, and created a hi-resolution file, they seem to be correct for 100 yards.
 

Attachments

  • Capturegg.jpg
    Capturegg.jpg
    37.2 KB · Views: 201
Last edited by a moderator:
How does this look as a 200 yard target?

Scale is at top of JPG
 

Attachments

  • Capturehh.jpg
    Capturehh.jpg
    46.1 KB · Views: 205
Last edited by a moderator:
Not sure the size, never checked after I scanned it. All you have to do is have the pdf fit a 8.5x11 sheet of paper when you go to print.
 
DSM said:
Not sure the size, never checked after I scanned it. All you have to do is have the pdf fit a 8.5x11 sheet of paper when you go to print.
Click to expand...

The problems I have seen with that some printers will vary up to 3/16" due to internal settings scaling from a large target.

I re-did it in high resolution for you guys!

Tim
 

Attachments

  • 100 YARD BR.pdf
    270.8 KB · Views: 301
You must log in or register to reply here.
Back
Top