Search results

John Lewis and Rodney..............Congratulations on some great shooting. Both fine gentleman and great competitors. Rich De

I have been shooting the 600 yard matches at Piedmont from its inception and it just keeps getting better. Thanks to all the crew for a great place to compete. Rich De

Ditto on the Enco. I have had mine for about 15 years and it does a multitude of milling chores. Rich De

Congratulations Matt! A great accomplishment for sure. Rich De

Leeroy............Go with the brake! It will do nothing to destroy accuracy period. Probably 98% of all shooters in light gun (here in the states) use a brake. It causes less disruption of you gun in the bags, allows you to get back on the target quicker, causes less felt recoil and all in...

Had you thought about getting some .222 Rem. Mag. cases and pushing the shoulder back. Then trimming to length. This will give you some thicker brass for a slightly closer fit? You also might try, after fire forming, to just size maybe 3/4 of the neck. This will allow that other 1/4 of the...

Nice target Jeff! Rich De

Congratulations Frank Rich De

Dale..........As Marion stated, just set your point of impact to be 25" + at 100 yards and go to the match. You will be fine. I have shot this cartridge and combination you are using for almost 10 years. Rich De

Just remember, the Winchester brass mic's around .495" on the base where the Lapua/Norma/Hornady 6.5 x .284 mic's right at .500". If your chamber is cut with the Lapua type reamer, it will allow your base to somewhat "bulge", but not effect accuracy. On the other hand, if you FL resize, you...

This is not unusual for Sam...................Every month I come to the matches and just expect him to break a record! He deserves it as he puts in a lot of work and preperaration along with good equipment. Again Sam..........Good shootin'! Rich De

Congratulations Ray.................................(We missed you at Piedmont Saturday:) ) Rich De

For me, I set my "v" blocks at the base and just at the shoulder of the case. I set my dial indicator to run just behind the ojive. I look for about .0015" or under. Rich De

Lynn.......Yes, there are a number of shooter using RE-15. I have shot it and it does well but as you know, on a given day, you shoot a couple good groups with a powder and now it becomes the better one???? The next time you play at the range and try a different combination and it shoots...

Jackie.........Steve Shelp out here in NC has been quite successful with his 6.5 x 55 imp. at 1,000 yards. As far as the 6x47 Laupa? I have a reamer and did chamber one rifle with it that I never could get to shoot really well. I am now into the 6mmBRX and find it competitive down here at the...

Lynn........What is your point???? The case I used was previously fireformed to BRX. I loaded 33 gr. of Varget. How is that 34.5? So, the rifle was shot today fireforming a few cases with 30 gr. of H-4895 and a 88 gr. Berger; 3,000 fps instrumental, 15 ft. from muzzle. After remounting the...

snakeeye.........It would be a little work to gather the information on all the barrels just to answer your question. But just from my recollection, there was never anything way out of line. Then you would have to factor in we all are shooting over different chronographs. I would think the...

skee...........I chambered all four of these barrels. I have a Hawkeye bore scope and can see nothing wrong. The cases form perfectly. They match in dimension to the ones from the other three barrels. We even put the barrel on another Remington action? I am also sure the guys at Brux have a...

Robert............First of all, it is not MY barrel! It belongs to a friend. But even if it was, I would feel the same way. It is however one of three that were ordered as a group. Another one was purchased a month or so later. What you are saying is somewhat logical but even reasonably...

I don't know if this is an appropriate section for this or even the right spot? It concerns giving recognition to a company who wants to do right for the customer. Norm and Ken at Brux barrels are people who are concerned that their customers are satisfied. This past year I had purchased four...