Search results

Rick

" Originally Posted by jvee What an interesting topic! I found about 500 of Jeff´s bullets in garage (old ones), and shot them in a new 13,5" Bartlein. They really shoot. I have over 3000 of Berger Columns and I decided to give a try to some old bullets I had. The new Bergers did not shoot bad...

Good job on the pics Mark but next time do a photo shop and cover the grey/ white…………maybe with some black/ brown and hey even red! Rick

Hi Al, Yes he is and he is shooting 2 guns. Jim is also comming and we might want to be on the same bench for flags. Thanks Rick

Got a car load Al...............3 of us. No Frank though, he had another stroke so he is waiting clearance form the Doc. Later...... Rick

Many Thanks…. Tjensen…. The link is much appreciated. Rick

Does anyone have a tutorial on re-barreling a rimfire or know where it can be found? Text would be ok too. Thanks Rick

Hunting rifle? or Target rifle? Target I now use Helmsman Spar Urethane in the matt finish, last coats spray it on and stick it in an oven at 150 Deg. for 2 hours comes out hard as a rock, it will rival the two part auto finishes. I use a cardboard box, heat gun and a lead pot thermometer to...

Just something to ponder, .....back in the day I never used filler. When the surface was at or close to applying finish I would cut TruOil 1/3 with mineral sprits, apply wet and sand it into the wood with 320/ 400 until it was thick. Do the whole stock and let it dry, re-sand, clean and check...

Hi Dan, This is what I did on my Heavy 10......... http://rickaverill.com/lathe-stuff/ Rick

Looks good to me Skeetlee, there are several different ways of making action wrenches, each have + & -. In the pic the top wrench is from Time Precision, the middle one is a port wrench that I made for a M 70 and 700 Rem. and the bottom is a Kelbly’s Panda wrench. They all work well on BR soft...

To all, Dudley and I will be there but Frank will not. Sorry to say that Frank had a stroke, from what I hear he is going to be ok but all the tests are not done yet and results are pending. Rick

As before Al, Frank and I will want to share a bench, guess we are the only ones coming form this area. Thanks.. Rick

Al, need to share a bench with Frank again if possible, I spoke with him last Friday and all seems well on his end, not sure who all is coming but pretty sure Dudley is also. Thanks….. Rick

There is one for sale here, I send a PM to him with no response..........Ya can have it for $80 delivered, any takers? PTG, bushing pilot, .370 NK, 0 FB, 1/30" L. Rick

Al, we will be there, Frank and I will need to share a bench, hope ya can work that out........... Rick

http://www.egwguns.com/scope-mounts-page-4/ Check the info above... Rick

It will also work on M-70 Winchester if you only purchase the 700 Remington head. Rick

Butch, I agree but there is something to be said for mass and that translates to precision. The foundation needs to be right but then I come from precision grinding, not turning. Without some sort of sink to absorb vibration it will end up in the work, I believe this is one reason some have...

Ben Dover; Would you have any pictures of your set-up that you could post? I would be very interested what you have described for I am looking at building one myself. Thanks Rick