Search results

Thank you Charles! Thats really helpfull. I haven´t spoken with the guys here in europe yet, but having a part # will for sure help. Peter

Charles, Thanks for your reply! I´m located in Sweden, and so is Leupold´s repair shop for Europe. Having it changed here would save me from alot of shipping problems... If anyone else have any experience with 35x or 40x 1/8MOA dots in the 45x45 scope, let me know!

Who can install a 1/16" dot reticle in a leupold competition 45x45 scope? Does Leupold offer it thru the custom shop? Is there anyone else? //Peter

Ooops... Read pointing instead of trimming... //Peter

Thanks! I should be fine then.

Hi guys, I have only been using one lot of Sierra jackets before, but now have an order in for J4 jackets. I have been using about a .2150" punch for a 67gr 6mm bullet. About what sizes are used with .790" and .825" 6mm J4 jackets? I have a lot of punches between .209 and .216, but nothing...

I have studied math at university, and I don't really get what the big problem is. The shooter with the .2162" agg had a 1.081" total spread, the other one had a 1.084". Shooter ones "score" is 1.081/5, shooter two came second with a 1.084/5... For me, it's like saying that 3 divided by 2 isn't...

33,5?? Easily? :confused: Are you still talking about a normal sized 6ppc case? If so, I for sure would buy as much if that lot of n133 that I could because it must be one strange lot... I have loaded the 'upper-upper window' with a handful of different lots, and getting consistent seating...

Bart, Do you have the rear bag set up so that the stock rides on the ears, or does it bottom out between them? If up on the ears, does the gun track OK? Regards, Peter

The VV factory is saved, quite old news. Lapua bought it.

Gene, What kind of barrel life are you getting with the 220 Beggs? //Peter

Larry, Could you please tell us a little more about your bullets? Ogive type, jackets, BT or FB etc? Regards, Peter Ericson

I don´t think that Sako has ever had a trigger adjustable that low... The normal trigger works down to around 2lbs, maybe slightly lower. The target trigger can be safely set to just below 1lbs. You can change some springs to get to about half a pound, but you have to know what to do. 4Oz is...

Who changes the reticles in the LCS scopes to the 1/16? I have the "1/8" dot in my 45x, and it is quite a bit bigger that 1/8", or MOA, or whatever it is suposed to be.

Electroless nickel plating looks fairly good on paper compared to hard chrome. I spoke with a company who does it, and they thought they could plate the inside of a die evenly... But, they had never tried before:rolleyes: I guess the problem with all platings/coatings is that the steel below is...

Just take the handle off, screew out the screews that holds the front plate, and remove all the old grease. Put in whatever grease you like to test, and reassembly the rest. Really isn´t that difficult, and there is nothing that could be damaged.

http://translate.google.com/translate?hl=sv&sl=fi&tl=en&u=http%3A%2F%2Fyle.fi%2Fuutiset%2Fksml_vihtavuoren_ruutitehtaan_myynnista_neuvotellaan_nammo_lapuan_kanssa%2F6534997

Vv doesnt have three factories, Eurenco who owns them own other powder mfg as well, but VV powder is only made in their factory...

Hope this works! http://translate.google.com/translate?hl=sv&sl=sv&tl=en&u=http%3A%2F%2Fwww.smocka.fi%2Fnyhet%2Fm%25C3%25A5n-2522013-2103%2Fallt-mer-sannolikt-att-krutfabriken-l%25C3%25A4ggs-ner If it doesn´t, use google translate on this link...

http://yle.fi/uutiset/government_to_rescue_last_gunpowder_factory/6462398