Search results

My turtle

I hope your joking about turtle killer!

I cant say I ever saw a Mitchells there! But I only shot up there from 1969 till about 1985 However I do go up once or twice a year just to check things out!

For years all the guys shooting at Williamsport used them, lots of records set at 1000 yds. Some still use them, however most turned to the variable because they also use them to hunt, and the field is so much better. Most up there used Unertls 15x, 20x, 24x also BV20s and some pulled the...

I have used the spring on many rifles from 6.5-300 7mm300- and 30 378 never noticed a difference. not saying there isn't any! But I couldn't measure it!

:cool:Some have a spring that goes from the ring to the stop, so you don't have to pull it back. A lot of the old timers took the spring off and pulled it back by hand thinking the spring would pull it back too far. On mine I kept the spring and never noticed the difference. I shot all unertls...

I have Lawton bottom metal and mag, plenty of lenth even for 338-408

Do you lap the prop. to fit the tapered shaft? We found that it helps to keep the prop tight when going from forward to reverse!

Jackie, are the cutters square, or do they have a radius? We had problems with square keyway slots . Seems they would shear quicker then a slightly rounded one had to check them every year with die check.!

This is our shooting shack, Not much but very comfey in dec. in pa. 800to2500 yds

I don't use 16 but I do use 19 in my 6 AI shoots very well with 87 gr. hornadys

I make the mandrel out of a grade 8 bolt Then just toss it in the scrap!

I turn mine the same way Jackie does his, and yes the neck is pushed onto a piolet the same dia. as the bullet. Then single point turn with the head of the case floating. Check it with a indicator the neddle doesn't even move!

Yes Sir, exactly > I didn't think somebody else isn't doing it that way HaHaHa

The way I do it on a lathe is simple, I first turn a mandrel from a grade 8 bolt to the exact dia. of the bullet taper the front a little . Then push the case on with the tailstock turn to desired dia. 1 pass let the carriage there! Pull the case off push another on. Very simple. I run a dial...

Yep B/mp last run was in the middle 70,s Could run just under the National record (don,t remember what it was then) but there were guy,s running quicker But nobody eould set the record then they would have to spot more! HaHaHa Don,t care for it anymore since they don,t run classes. Oh well...

Back when I had more $ then brains HaHaHa 62,327 60 over crane roller, tunnel ram 565 hp on the dyno

I am also an oldster ! But I see no hope, 53% of the people don,t pay taxes and are getting freebees. They will vote to keep that ! The whole country is up side down. I don,t think there are enough good people to change that. I will keep on voting ,without much hope! Even the good...

I am pretty sure he means a .308 bolt face !

I have shot these for 35+ years good scopes and very good adjustments, however the Nightforces are much clearer and great adjustments also. I have since sold all 3 of mine to a Man named Deewayne Greiner in Mi. He buys and sells them and gives very fair $ I hae bought them new in the 78and 80s...