C
coyote06
Guest
wichita 1375 misfiring
I have a Wichita 1375 and the firing pin doesn't strike very hard to the point I'm getting a lot of misfires if I don't use softer primers fed 205's don't give any misfires but any of the cci do.
The pin protrusion is good and I realize the pin has a very short throw would a heavier spring be the answer I'm kind of scared it's going to give a much stiffer lift which is already enough
I have a Wichita 1375 and the firing pin doesn't strike very hard to the point I'm getting a lot of misfires if I don't use softer primers fed 205's don't give any misfires but any of the cci do.
The pin protrusion is good and I realize the pin has a very short throw would a heavier spring be the answer I'm kind of scared it's going to give a much stiffer lift which is already enough
Last edited by a moderator:
