Turbo Action

B

BHinegardner

Guest
For those who have been waiting, I now have all parts available for Turbo actions. Actions are ready to go as soon as we have ATF paperwork back. Thanks, Bill H
 
The parts were not made by Flash, they are newly manufactured.
 
After the couple of tweaks that Flash made, there isn't much to improve....
 
There are several variations of a better loading ramp. Most involve a spring loaded ramp that will move down as the bolt is closed. The Myers action solves the problem with a Swindelhurst style bolt and ramp. All these options are radical changes from the Turbo and not practicle from a tweaking prespective.....
 
I milled the bolt release slot on mine ahead by .200 which gives a lot more room without cutting the action. There is plenty of room to move the slot ahead. It would be nice to be able to extend the loading ramp back .200 so that the ejection pin would be out of th way. It also appears to me that the front of the bolt could be thinned out some and the ramp brought upward a bit. I would try to do this so that prominent rail like structures would be on the ramp. No doubt the Turbo is a GREAT action but the loading issue being addressed couldn't hurt it any.
 
Last edited:
Slick Willy,
As of this time, we don't have Flash's waiting list. However, we anticipate being fill orders fairly quickly once we get ATF approval. You can email me at Bill@ir5050.com if you'd like.
 
We will have lb/lp/r-eject available.
By the way, we got a call Friday and the inspection for licensing is to take place within two weeks. We're getting closer!

Bill
 
You must log in or register to reply here.
Back
Top