Neck Turners
Case Neck Turners are amazingly simple, a fiitted arbor, a tool bit, and some means of turning the case, in this instance, by hand.
The fact is, any case neck turner, if used properly, will give good results. The case has to fit the arbor coorectly, and the tool has to be the correct distance from the arbor.
Most of the higher end turners are designed around making the operation more user friendly.
That RCBS Turner will turn necks, and give the desired results if used properly. But, as has been stated, there are a current turners on the market that are quite specialized in meeting the needs of the Extreme Accuracy Crowd.
If cost is the only perameter, the RCBS will do. If you have a little extra in the piigy bank, go with something a little more sophisticated..........jackie