B
Big G
Guest
Anyone have a heads up on the Stillers???
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
We now have 3 models in work. The original 25X has basically became the Lonestar. It is a single shot action with a CMP bolt in it by PPG. It is available in RBRP and RBLP in the next 3 weeks or so. The bodies are done as is the bolts. The only thing left is some assembly and putting in the rail blocker. I built 100 of them and Killough is getting at least 20 of the RBLP. The bolt is built the same as the Remington with the firing pin stop at the cocking piece and a 12 oclock pin. The 25X will be very similar, but have a repeater cutout with our version of that same bolt that has an internal firing pin stop. We think we are going to a marlin magazine. Later this year on that one.
The third action we have is a Copperhead. It is a single shot only version with a Anschultz type of loading ramp and a dual firing pin setup like a Time. We have 10 protos being done and will be bringing one to the ARA nationals God willing and enough hours this weekend to finish it.
We are also building something similar to it for Killough, but with a 40X firing pin design and a center cut out port. Dan will be getting prototypes to show at the ARA nats.
Thats about it.
The third action we have is a Copperhead. It is a single shot only version with a Anschultz type of loading ramp and a dual firing pin setup like a Time. We have 10 protos being done and will be bringing one to the ARA nationals God willing and enough hours this weekend to finish it.
We are also building something similar to it for Killough, but with a 40X firing pin design and a center cut out port. Dan will be getting prototypes to show at the ARA nats.
Thats about it.
B
Big G
Guest
Thanks for the info. I'm on the waiting list for the 25X repeater. Been waiting on this action for a squirrel rifle build for a while. Will be worth the wait.
Jerry are you going to make the Copperhead in left bolt right port??......Ian
We now have 3 models in work. The original 25X has basically became the Lonestar. It is a single shot action with a CMP bolt in it by PPG. It is available in RBRP and RBLP in the next 3 weeks or so. The bodies are done as is the bolts. The only thing left is some assembly and putting in the rail blocker. I built 100 of them and Killough is getting at least 20 of the RBLP. The bolt is built the same as the Remington with the firing pin stop at the cocking piece and a 12 oclock pin. The 25X will be very similar, but have a repeater cutout with our version of that same bolt that has an internal firing pin stop. We think we are going to a marlin magazine. Later this year on that one.
The third action we have is a Copperhead. It is a single shot only version with a Anschultz type of loading ramp and a dual firing pin setup like a Time. We have 10 protos being done and will be bringing one to the ARA nationals God willing and enough hours this weekend to finish it.
We are also building something similar to it for Killough, but with a 40X firing pin design and a center cut out port. Dan will be getting prototypes to show at the ARA nats.
Thats about it.
X
xpfuzz
Guest
Hey Jerry,,I`m still waiting on a L/L action for a pistol build......Don`t forget...