X
xs hedspace
Guest
Need advice, y'all. I built this BR rifle on a 1916 DWM action, about 10 years ago, and chambered for a wildcat, a 220Swift case wayyyy shortened, and necked for 6mm. The Wiseman McMillan 14" twist barrel will shoot in the teens, if the wind don't blow. I'm getting old and tired of doing all this sizing and reaming on this case, and would like to set the barrel back a few threads, and rechamber to 6 PPC. Now, if I grind the extractor front guide lip back, so the extractor hook will come in a few thou, the PPC case should be OK for extraction, right?? It's a single shot anyway, so all I need it to do is pull the case, not fling it into the weeds. Seems OK to me, but I figure somebody here has some experience with this. BTW, I recently read that Pindell tried doing this same 220 Swift thing, for a smaller case capacity 30 years ago, but found that the brass was so thick, that bumping the shoulder back was a PITA. Guess what? He's a smart man.
Last edited by a moderator: