J
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Popped a primer, Busted ma' Jewell, help?
- Thread starter alinwa
- Start date
Joel,
I don't remember, but I doubt it. I probably just threw it on a Bruno's order because it was there. To the best of my knowledge I've never ordered a ratchet. I had the barrel setting around for a couple years then had it chambered up for use as a varminter and to see if it would shoot............then this 600yd match came up with its 17lb weight limit and I just put it all together, rebalanced to rifle and took it out to see could I get it to swap bullets at around 2900............I found my recipe at 2800 with the long floppy barrel but I found that I could run 'er up over 2900 easily so I went clear up to POP! I was just looking for a "node" or pattern of some sort. (Actually I was looking for slower bullets to be printing higher at 350 yds......)
I'll try to find an invoice.....
Hey! Can you SEE ratchet rifling? I've never looked down the bore.
al
I don't remember, but I doubt it. I probably just threw it on a Bruno's order because it was there. To the best of my knowledge I've never ordered a ratchet. I had the barrel setting around for a couple years then had it chambered up for use as a varminter and to see if it would shoot............then this 600yd match came up with its 17lb weight limit and I just put it all together, rebalanced to rifle and took it out to see could I get it to swap bullets at around 2900............I found my recipe at 2800 with the long floppy barrel but I found that I could run 'er up over 2900 easily so I went clear up to POP! I was just looking for a "node" or pattern of some sort. (Actually I was looking for slower bullets to be printing higher at 350 yds......)
I'll try to find an invoice.....
Hey! Can you SEE ratchet rifling? I've never looked down the bore.
al
Boyd Allen
Active member
Al,
Yes, you can easily see Ratchet rifling. The non-driving side of the land is very distintive , like you set a 30-60-90 triangle to exactly fill in that side.
Yes, you can easily see Ratchet rifling. The non-driving side of the land is very distintive , like you set a 30-60-90 triangle to exactly fill in that side.