You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
North Carolina State 3 Gun Championship
- Thread starter ErnieJ
- Start date
A
Aussie John
Guest
Problem with Randolph Front rest
G'day,
Sorry guys if this is not the way to create a thread (newbie)
Recently taken delivery of a new Randolph front rest. I have an issue with the horizontal adjustment and the knob that moves the rest from left to right. Rest is for a RH shooter.
When the top of the rest is at the further most left position the knob itself will completely unscrew with the slightest of finger pressure.
My question is should there be a grub screw to affix the knob to the internal shaft / thread.
Looking for some help/ advice
Thanks
G'day,
Sorry guys if this is not the way to create a thread (newbie)
Recently taken delivery of a new Randolph front rest. I have an issue with the horizontal adjustment and the knob that moves the rest from left to right. Rest is for a RH shooter.
When the top of the rest is at the further most left position the knob itself will completely unscrew with the slightest of finger pressure.
My question is should there be a grub screw to affix the knob to the internal shaft / thread.
Looking for some help/ advice
Thanks
Kent Owens
Active member
That's normal, just don't unscrew it LOL. I usually set mine with a bit of preload so it's not all the way left to keep a bit of tension on it.
Pepper1079
New member
Can't make it. Out of town. Hope all have fun. I'll be thinking about you. Jim