D
DasFriek
Guest
Add to that im a noob it makes it harder to know where to start, I just started BR shooting a few months ago. To top it all off i bought a gun that isnt BR friendly. But i learn fast and shoot well and to get that last bit of accuracy wrung out of the gun a tuner/Fudd/Bloop tube will be needed. I know little of what the differences are in each, But i get the concept and how they work perfectly.
The gun:
CZ Ultra Lux with a 28" barrel and a Don Stith Sporter BR stock.
Alot has been fluffed and buffed and no since in telling you everything.
It is currently shooting groups in the .3" range at 50 yards with Wolf MT and Eley Target.
So i know it can be improved further with it doing so well now.
(Edit) At first i thought id have to cut the front sight off, But was informed the sight is a sleeve. Its not known how to remove it yet without destroying anything. You have a clue?
One issue this presents is that once the sleeve is removed it will leave a very thin 2" section of barrel. Would it be better to have another sleeve made with a larger diameter so the tuner would fit better?
Would shortening the barrel make the tuner work better and be over all a better idea for BR use?
(End Edit)
As to tuners, Whats is available and would most likley work best?
Adjustability would be important and affordable would help also.
Im looking at the vonAhrens Tuner & Tuner Weight System from www.killoughshootingsports.com as i think this will give me the most adjustability for the money. But do you think just a plain Harrel tuner to start with and then buy what i need as i go?
I know this is an odd gun and setup so i included some pics, Its a great shooter for me.
But given my lack of experience any suggestions would help alot.
The hard part about how tuners work and how to adjust them i know or can look up, I just need direction on where to start.
The gun:
CZ Ultra Lux with a 28" barrel and a Don Stith Sporter BR stock.
Alot has been fluffed and buffed and no since in telling you everything.
It is currently shooting groups in the .3" range at 50 yards with Wolf MT and Eley Target.
So i know it can be improved further with it doing so well now.
(Edit) At first i thought id have to cut the front sight off, But was informed the sight is a sleeve. Its not known how to remove it yet without destroying anything. You have a clue?
One issue this presents is that once the sleeve is removed it will leave a very thin 2" section of barrel. Would it be better to have another sleeve made with a larger diameter so the tuner would fit better?
Would shortening the barrel make the tuner work better and be over all a better idea for BR use?
(End Edit)
As to tuners, Whats is available and would most likley work best?
Adjustability would be important and affordable would help also.
Im looking at the vonAhrens Tuner & Tuner Weight System from www.killoughshootingsports.com as i think this will give me the most adjustability for the money. But do you think just a plain Harrel tuner to start with and then buy what i need as i go?
I know this is an odd gun and setup so i included some pics, Its a great shooter for me.
But given my lack of experience any suggestions would help alot.
The hard part about how tuners work and how to adjust them i know or can look up, I just need direction on where to start.
Last edited by a moderator: