KM Arbor Press

[REMY]

Hi, i am looking to get a press and was considering the one with the force measurement and dial indicator , question is that on there web site they list two chioces , one being a standard version and the other a low force version,
I'm wanting to use this Arbore press for 6ppc /BR , which one is the better choice ?

All replies appreciated,

 

[Wilbur]

Not certain you'll appreciate this one. Just get an arbor press that will easily and comfortably seat a bullet in a 6PPC case. One without all the bells and whistles.

 

[bill larson]

Simple=Better

Not certain you'll appreciate this one. Just get an arbor press that will easily and comfortably seat a bullet in a 6PPC case. One without all the bells and whistles.

AMAN....... Good advice here........
bill

 

[rkittine]

I went the simple route figuring that once the die was set, I didn't need anything other than the plain Jane arbor press to squarely press things home. Bob White even talked me out of getting a micrometer topped Wilson seating die and using a plain die and a set of shims for finer adjustments. I do have the K&M but the plain one.

Bob

 

[REMY]

Ok fellas you convinced me and it's going to cost less too.
Thanks again

 

[1bamashooter]

Get the 21st Century hydro press I love mine.

 

[Pete Wass]

I started with

a bottle capper a "Friend" sold me, fellow shooter too .

Pete

 

[JerrySharrett]

Not certain you'll appreciate this one. Just get an arbor press that will easily and comfortably seat a bullet in a 6PPC case. One without all the bells and whistles.

++

I've used the plain K&M for years.. Works great.


.

 

[Chism G]

Whats wrong with a little plastic hammer and a L.E.Wilson inline seater Die,for simplicity?