High Pressure Flush System made at TSJC

[Rustystud]

This is the pump system we made in our class for chambering. There is a 15 gallon coolant tank below the pump all on a caster wheel chasis made from 1" square tubing. This system is using Rustlick 255R Coolant Lubricant. This system incorporates an air port for drying out your chamber before headspacing. This is a nice addition.

Nat Lambeth

 

[Pete Wass]

Wow

She's a Bigun!

 

[Joe Duke]

Very nice. Do you have a picture of the barrel attachment?

Joe

 

[AeroE]

Ron Ziegler sectioned the chamber he cut while you were out there. The finish was remarkable.

 

[zp3design]

What am I missing here boys...no picture?

Bob

 

[Rustystud]