Hunter
Chasin' the Sunset
As mentioned on another thread, I have a factory 6PPC and the neck on fired brass measures .269. I have a standard Redding FL die and a Wilson neck die. IIRC (and if I measured correctly), the Redding die sets the shoulder back .01 and the Wilson die doesn't move the shoulder.
I'm thinking of getting either a Harrell's resizing die or a Redding body die (to use when neck-sized brass creates too much bolt-closing stiffness); I believe there's there's about $50 price difference between the two. Any advice on which to get for my factory gun?
I'm thinking of getting either a Harrell's resizing die or a Redding body die (to use when neck-sized brass creates too much bolt-closing stiffness); I believe there's there's about $50 price difference between the two. Any advice on which to get for my factory gun?