Gracey Neck Shaving Machine

Neck Turner

I have never seen one of these, the proof will only be in how accurate it cuts from case to case.

But the add says "20 cases per minute". Come on, that is one every 3 seconds. Doesn't that seem a tad far fetched.........jackie
 
Jackie,
Yes that's exactly what I thought as I turn my 220 Russina brass from .014± to around .0086 over 3 turns.:confused:

But being a novice shooter, thought I would put the question out before doing anything.

Thanx 4 ur reply
 
Jackie,
Yes, that's exactly what I thought as I turn my 220 Russina brass from .014± to around .0086 over 3 turns.:confused:

But being a novice shooter, thought I would put the question out before doing anything.

Thanx 4 ur reply
 
.......The heart of the Gracey Power Neck Shaver is the patented cutter head which houses three adjustable cutters and a mandrel matching the inside diameter of the case neck to be shaved. The amount of material removed from the outside of the cartridge case neck and ultimately the neck wall, is controlled by adjusting the cutter in or out of the cutter head......

Man, I have enough trouble getting the two blades set right on my old Makita 1100 wood planer!
 
Shinny, I have one set up for 6.5. I thought it worked good on 6.5-284.
If your interested i'll sell it at a really good price. All you would need to do is get a 6mm mandrel.
Ken
 
You must log in or register to reply here.
Back
Top