Forend Width Larrry B.

[Bob Pastor]

Larry B.,

Is there anything in F Class rules that limits the width of the forend of a stock?

Bob

 

[Bob Pastor]

Found the Rule

Hi Larry,

I found the rule. Someone asked me and I couldn't find it at first.

Bob

 

[barry t]

hello Larrry B, if i remember it is 75mm or 3 inches.it is here in australia. from barry t.

 

[Keith Skjerdal]

Not Larry but... it is under...

F2. TECHNICAL SPECIFICATION of RIFLES and
AMMUNITION

F2.4. If a rifle is used with a separate front rest/bag, the fore-end
width may not exceed 76mm.

 

[LarryBartholome]

Stock Width

Hi Bob,

Hope you are doing well. I just got back from the NRA Annual Meeting in Phoenix, AZ.

The rule is 76 mm of course, but be aware a number of stocks are wider than that, particularly if slick stock tape is put on them. 76 mm converts into 2.992117 in the program I used. The NRA rule book states “shall not exceed 76mm (approximately 3 inches).

Larry B.

 

[Bob Pastor]

Thanks Larry

I knew you were out there some where. Concerning Nationals:

I'm having a hard time finding a campground near Butner. Any ideas on who to contact? I emailed Jeff Royer and he sent me to Ira Jones. Ira said there is one six miles from the range but it's pretty shabby. Where does John Brewer park his Limo.

Bob

 

[LarryBartholome]

RV Parking

Bob,
I don't know where Bewer parks. I'll send you a personal message with his e-mail address.
LarryB.

 

[Bob Pastor]

Thanks Larry

Got the email and will contact John tomorrow.