Forend Width Larrry B.

B

Bob Pastor

Guest
Larry B.,

Is there anything in F Class rules that limits the width of the forend of a stock?

Bob
 
Found the Rule

Hi Larry,

I found the rule. Someone asked me and I couldn't find it at first.

Bob
 
hello Larrry B, if i remember it is 75mm or 3 inches.it is here in australia. from barry t.
 
Not Larry but... it is under...

F2. TECHNICAL SPECIFICATION of RIFLES and
AMMUNITION

F2.4. If a rifle is used with a separate front rest/bag, the fore-end
width may not exceed 76mm.
 

Attachments

  • Microsoft Word - ICFRA F-Class Technical Rules 2007 A5 Edition.pdf
    278.3 KB · Views: 2,028
Stock Width

Hi Bob,

Hope you are doing well. I just got back from the NRA Annual Meeting in Phoenix, AZ.

The rule is 76 mm of course, but be aware a number of stocks are wider than that, particularly if slick stock tape is put on them. 76 mm converts into 2.992117 in the program I used. The NRA rule book states “shall not exceed 76mm (approximately 3 inches).

Larry B.
 
Thanks Larry

I knew you were out there some where. Concerning Nationals:

I'm having a hard time finding a campground near Butner. Any ideas on who to contact? I emailed Jeff Royer and he sent me to Ira Jones. Ira said there is one six miles from the range but it's pretty shabby. Where does John Brewer park his Limo.

Bob
 
Thanks Larry

Got the email and will contact John tomorrow.
 
You must log in or register to reply here.
Back
Top