Dimensioned .220 Russian Case Diagram

D

donjfred

Guest
Strange. I have searched the web and forums and literature for a dimensioned drawing of the 220 Russian Lapua case and can't find one.

Probably the most used benchrest case there is, but no diagrams? Is it me or is this some kind of propietary info?
Any body have one they can post?
 
]http://stevespages.com/jpg/cd220russian.jpg

cd220russian.jpg
 
Last edited:
Thanks German. I guess that explains why no "220 Russian". I'll go back to the references with the 5,6x39.
Don
 
Hey Dick, thanks for the link, but
When I click it I get "Forbidden...you have no permission............"
Is there another way to it?
Don
 
donjfred said:
Hey Dick, thanks for the link, but
When I click it I get "Forbidden...you have no permission............"
Is there another way to it?
Don
Click to expand...

Can you see it now Don ? I had no permission first time I ever found site

It was hard to find by the way. took several searches and about 5 minutes
 
Dick, I must be missing something. You're original post has a box with an "x" in it and the Link still says "forbidden". Your last post has no picture or link.
What should I be seeing?
Don
 
Great source of cartridge drawings. I bookmarked it for future reference.Thanks, but Still can't find the 220 Russian or the 5,6x39 that German said was the metric equivalant. The mystery continues........
 
See if this helps

donjfred said:
Great source of cartridge drawings. I bookmarked it for future reference.Thanks, but Still can't find the 220 Russian or the 5,6x39 that German said was the metric equivalant. The mystery continues........
Click to expand...

fourth column to the right (last column)

eleventh row down
 
By George, I think I got it!
Thank you Nemohunter.
If I understand correctly, it's a necked down 7.62x39mm (AK-47) Crtridge.
I think the dimensions on the left are the widths in mm's and the one on the right are lengths.
 
Dick, I found the 220 Russian (right where you said I would) and it's exactly what I was looking for. Don't know how I missed it.

Thank you,
Don
 
Don ...

donjfred said:
Strange. I have searched the web and forums and literature for a dimensioned drawing of the 220 Russian Lapua case and can't find one.

Probably the most used benchrest case there is, but no diagrams? Is it me or is this some kind of propietary info?
Any body have one they can post?
Click to expand...

Here's another view below.
 

Attachments

  • 220 Specs.doc
    40.5 KB · Views: 403
donjfred said:
Strange. I have searched the web and forums and literature for a dimensioned drawing of the 220 Russian Lapua case and can't find one.

Probably the most used benchrest case there is, but no diagrams? Is it me or is this some kind of propietary info?
Any body have one they can post?
Click to expand...


Don, a detailed print of the standard 220 Russian cartridge can be obtained from Dave Kiff at Pacific Tool and Gauge. This was the print used in developing the 220 Beggs cartridge. With the standard 220 Russian , the radius at the junction of the neck and shoulder is .125. The only difference in the 220 Russian and the 220 Beggs is this radius. With the Beggs cartridges, this radius has been reduced to .060.

Gene Beggs
 
Thanks Gene.
What is Dave's email address?
Is his print of the chamber or the case?
Looking forward to my 220 Beggs Barrel. (Why aren't you in the shop?)

Go Gators,
Don
 
CIP Drawing for 5.6 X 39

I have a PDF drawing for the 5.6 X 39 (220 Russian) that I can E-mail to you if it will help.

I understand that CIP is the European equivalent of SAAMI.

A. Weldy
 
You must log in or register to reply here.
Back
Top