Bore Guide for Anschutz 54 Action

[Tom Wayte]

I am looking for a bore guide for a new Anschutz 1710 D HB (model 54 action).
Any bore guide recommendations for this rifle?

Also any recommendations on scope rings?

Thanks, Tom

 

[brad541thb]

Contact Mike Lucas.

He makes the best bore guides I have seen or used.

lucasmjb@windstream.net

 

[_Shorty]

He doesn't make Anschutz guides due to their offset bores. I've got one of these for my 1712, with a matching insert for my Ivy rod, and they're pretty nice.

http://www.mwerksllc.com/products/anschutz.html

 

[505Gibbs]

I bought mine from Champion's Choice. They have guides made by Anschutz.
http://www.champchoice.com/

 

[harrydeneen]

Bill myers

Makes the only one that i would use.. I dont know if he wants to make some but they fit great and with the offset bore they are hard to come by.. The ones you can buy through dealers are to loose... Hope this helps.. Harry..

 

[Jeffrey]

The one from M. Werks is definatly the best one out there. I have tried most of them out there and his is the only one that fits correctly and has a rod bushing that fit the rod.

 

[steve b.]

Or,

If you don't yank on your cleaning rod like you are tryin to start your lawn mower (i've seen shooters do it), you can get a basic delrin rod guide from Sinclair International.

 

[sailor]

Try Neal Jones. He makes a guide for the 54 and will provide the correct bushing for your rod diameter.