C
chris k
Guest
a fellow brought me a Savage 16 to rebarrel and as I look at it it has a smooth barrel nut ,how are you guys removing them ?
Thx Chris
Thx Chris
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
martin zuck
Member
Had one like that a while back. Put it in my lathe and cut it off!
martin zuck
Member
Now that I think about it I believe I used a high speed cut off tool and made a cut just in front of the reciever.
C
chris k
Guest
Thx Martin
I was hoping to save the barrel nut . One can imagine my surprise when I grabbed my Savage nut wrench and went HUHH what the hell . Is this Savages idea to keep people from removing barrels?? I could probably use a pipe wrench (not very professional) or try a strap wrench .
Chris
I was hoping to save the barrel nut . One can imagine my surprise when I grabbed my Savage nut wrench and went HUHH what the hell . Is this Savages idea to keep people from removing barrels?? I could probably use a pipe wrench (not very professional) or try a strap wrench .
Chris
C
chris k
Guest
perfect thanks OHT
F
Farmboy
Guest
I know several people that use a pipe wrench and replace the nut with a notched nut