6PPC Twist and Barrel Lenght

O

Oliver

Guest
Hi I am new to forum and i am new to Br shooting too , I am building a Br Rifle to compete in heavy varmint cat. my question is if you all here can help me in my choice i will be much appreciate it .

Building the rifle on a Mcmillan Egde stock and a Bat 3L action.

1.I need to know whats the best Bartlein barrel twist for 100-300 mts ?
2.Barrel length ?

Thanks for your help and for accepting me to your forum Guys.

Oliver
 
Most shooting the 6ppc are using 13.5 twist barrels, and 21.5”long. depending on where I am with weight on a light varmit gun, I may go a little longer so that if I need to set the barrel back I can do that and still have the barrel at 21.5”.
 
Oliver said:
Hi I am new to forum and i am new to Br shooting too , I am building a Br Rifle to compete in heavy varmint cat. my question is if you all here can help me in my choice i will be much appreciate it .

Building the rifle on a Mcmillan Egde stock and a Bat 3L action.



Oliver
Click to expand...

Question, why build a Heavy Varmint class which can only be shot in that one class. With your stock and action and using Light Varint taper barrel and something like a Leupold Competition scope you can have a gun that you can shoot in HV AND LV classes. A LV taper barrel of not over 21.5" long will bring you in. A LV taper Bartlein at 21.5" will weigh about 5 pounds, 2 ounces depending on where you cut the blank. Tracy Bartlein or Frank Green at Bartlein can tell you where to cut.

.
 
13.5, 13.85-13.75, 14 twist. I haven't seen much difference in how the twist rate makes the barrel shoot. Like the others I'd go for a LV rifle if it's your only benchrest rifle. I cut my barrels for 22". Another thing that is personal preference. No particular reason except that's what I've always used unless it needed a little taken off the muzzle to make weight. If your 3L is a 1.350 round action then you shouldn't have any problem making weight as long as your stock is a LV stock. If it's a HV stock it will be very hard to make weight as a LV. If it's a HV stock, I'd suggest selling it and getting LV stock to build a LV rifle. If you are building it to shoot score then by all means build a HV as there are not separate weight classes for Varmint for score. If you plan to shoot group, then build a LV weight if the stock will let you.
 
Thanks for the info , and from what i can see i better build the rifle for light varmint

oliver
 
Mike Bryant said:
13.5, 13.85-13.75, 14 twist. I haven't seen much difference in how the twist rate makes the barrel shoot. Like the others I'd go for a LV rifle if it's your only benchrest rifle. I cut my barrels for 22". Another thing that is personal preference. No particular reason except that's what I've always used unless it needed a little taken off the muzzle to make weight. If your 3L is a 1.350 round action then you shouldn't have any problem making weight as long as your stock is a LV stock. If it's a HV stock it will be very hard to make weight as a LV. If it's a HV stock, I'd suggest selling it and getting LV stock to build a LV rifle. If you are building it to shoot score then by all means build a HV as there are not separate weight classes for Varmint for score. If you plan to shoot group, then build a LV weight if the stock will let you.
Click to expand...

Thanks it make sense and definitely i have a lot to learn by reading in this forum

Oliver
 
Your Location

Where are you located at? You need to find a mentor that is nearby. It will save you lots of money and time learning proper techniques.
Joe Hynes
 
liljoe said:
Where are you located at? You need to find a mentor that is nearby. It will save you lots of money and time learning proper techniques.
Joe Hynes
Click to expand...

+1000

I can remember years ago when I wanted to get into Benchrest. It was all of big mystery.

When I met him at a local gun show, Glenn Newick invited me to a local match, and just about every mystery was revealed.

It's kinda like playing a musical instrument. You can read every book written about the subject, but you will never get the full concept untill you actually see it done.
 
Last edited:
I agree with Jerry and Joe. Unless it's your second or third gun you need to build a Light Varmint...allows you to shoot all classes. Also would help a lot to find a mentor. There are many shooters who would be glad to help out...so what part of the country do you call home?

Steve
 
liljoe said:
Where are you located at? You need to find a mentor that is nearby. It will save you lots of money and time learning proper techniques.
Joe Hynes
Click to expand...

In Europe small country named Malta
 
You must log in or register to reply here.
Back
Top