6mmRem BR vs 6mmNorma BR

I

Indy

Guest
I am sure this question has been answered many times and I apologize for asking it. Is the a difference between the Remington version and the Norma version? If there is a difference, where can one buy brass?
Indy
 
http://www.benchrest.com/forums/showthread.php?t=46587&highlight=remington+Norma

http://www.benchrest.com/forums/showthread.php?t=46960&highlight=remington+Norma

http://www.benchrest.com/forums/showthread.php?t=44334&highlight=remington+Norma

http://www.benchrest.com/forums/showthread.php?t=31177&highlight=remington+Norma

I hope these threads will answer your question. I'm not sure that I understand what you're asking........

If you're having a rifle built just size it for the Lapua brass and be done with it.

Lapua and Norma brass are readily available.

al
 
6mmBR

Thanks for the responses. I see now I should have asked the question a little different. I am considering purchasing a Savage rifle chambered for 6mm Norma BR. If I understand correctly, because it's a new rifle the chamber will handle Lapua brass. Sorry for the beginner question.
Indy
 
Inflation

Butch Lambert said:
What do you mean Pete?
Butch
Click to expand...

I recently paid $78. per 100 for it. It is listed @ $ 96.60 @ Sinclair in the list Adrian put up. I don't find paying a lot more much fun, do you?

At those prices I will use something else like 308 Winchester cases
 
Pete Wass said:
I recently paid $78. per 100 for it. It is listed @ $ 96.60 @ Sinclair in the list Adrian put up. I don't find paying a lot more much fun, do you?

At those prices I will use something else like 308 Winchester cases
Click to expand...

When I was getting started in BR in '95 Lapua 220 russian cases were $1.05 apiece............and no, that doesn't justify the increases, but it sure is a thinker. BTW, those cases didn't snug up nearly as fast as as the ones since they disappeared for a while and came back out in the .40-some cent range.

-Dave-:)
 
Pete Wass said:
I recently paid $78. per 100 for it. It is listed @ $ 96.60 @ Sinclair in the list Adrian put up. I don't find paying a lot more much fun, do you?

At those prices I will use something else like 308 Winchester cases
Click to expand...


Then you've obviously never done this Pete!

Lapua at 2.00/case would be cheaper than anything else on the market..... unless you shoot under 3000........

I've got a ..308 shortened HBR round that EXACTLY matches my 30X47, in fact it uses the same sizer die. The 47 cases will make more than 200fps on the .308 stuff.

al
 
You must log in or register to reply here.
Back
Top