222 Rem / 250 neck - - Would this be a no turn neck?

[SSV1761982]

I'm not home to measure a round but I think this would be a no turn neck, or is it?

 

[CMaier]

technically..yes.....but you are on the bottom end of the spec.

you will have to check your brass/bullet combinations

 

[SSV1761982]

Will do

Thanks

 

[GerryM]

Its ok but not really a tight neck.
depends on what brass your using. 255 256 is sammi specs

 

[CMaier]

simple math
.224 dia bullet
.013 brass x2 is .026+.224 is .250....
so max reasonable brass would be .012.
my older norma is .247 loaded....so aprox .0115

 

[Lee Martin]

FWIW, newly purchased 222 Lapua and a Berger 52 gr nets 0.250" loaded. You'd need to turn in that scenario with your chamber.

-Lee
www.singleactions.com