Search results

Works for me also. Later! Frank

Not knowing what I was doing when I built my BR rifle I bought a Richards Microfit stock. From day one I could not get it to track consistently. The butt is 1 3/8" wide and flat from the grip to butt plate. Almost zero drop at the heal. Tried a couple bags that were too narrow. I finally bit the...

You need to understand Medicaid's rules before you play their game. If you are trying to sell/transfer title to your house to keep them from putting a lean on it, you need to know their time frame. It could be several years. Later! Frank

Why do we need a baffle in a trickler? Later! Frank

I learned a long time ago that in every company that goes through basic there is one ahole that is always out of step. This always caused a lot of grief for the other 79. You mister our out of step. Later! Frank

Jim, I have a couple flags I bought from Bruno's a few years ago. They are made out of sign board with a Daisy wheel on the front. I am making one now. Later! Frank

I appreciate all the help. I really do! In a couple weeks I will be 69. I have a wife with Alzheimer's that I take everywhere I go. So far she likes to go out shooting with me. I haul all my range gear in the back of my 4X4. Unfortunately I am never going to shoot in a match. My immediate goal...

I have never lubed inside the neck. Tell me about that please. Later! Frank

Jerry, I am doing a lot of that and plan to do a lot more. I started the Nightforce topic and got my answer. Since I cannot high jack my own thread and had everyone's attention I just kept it going. As you can see there aren't many new topics in the 600/1000 forum. Thanks for your list. I am...

I do have a good spotting scope. I have another flag and surveyer's tape. Need another tripod. My target cam gear is using one. I wasn't weighing primers. After this morning's shoot I decided to build some rounds for a chronograph session tomorrow. I weighed 30 CCI-450s on my RCBS digital...

Went out to try 1000 again today. First shot on the target again and almost centered. A very good thing. Fired my first group with my #1 bullet. (105 Hybrid) The first three went 2.875”. The 4th shot went 13” low. (WTF) The 5th went right back with the first three opening the group to 3.5”. What...

One 20 yards in front of the bench and one at the target. Later! Frank

Going over my notes I find when I had problems getting on @ 1K I was usually low and right. I posted a question about yaw with no responses. I know there are some sharp folks on this site that already know the following. It seems with the 107 SMK @ 3000 fps I can expect around 13" of drift with...

The daisy wheel would turn very slowly and stop completely. Later! Frank

I only had one experience with Norma PPC brass and it wasn't good. When we built my BR rifle in 03 I opted for Lapua. I ran the first 200 cases over 20 firings without splitting one neck. I am up to 10 on the latest barrel and still haven't lost one. It doesn't get any better. Later! Frank

Went out to try 1K again. Forty degrees, sunny and only a slight 7 to 1 o'clock breeze. I had three loads with different bullets to test. All running a hair over 3000. This story just gets better all the time. Using the JBM calculator I set the elevation at 26.3" @ 100 for the 105 Amax. First...

Mine is new Jeff. I have been on a couple sniper forums. Several guys mentioned the 400 mark. I am done worrying now. Time to shoot. The weather is unseasonably warm here. Supposed to be 50+ tomorrow. Later! Frank

Camped and fished up and down Logan canyon before I discovered the Salmon River in southern Idaho. Later! Frank

I have been using the JBM calculator for quite awhile with good success. This is only the second time I couldn't get on. The only difference is the new scope and it is mounted higher than my old setup. The conditions weren't too good today. A different wind directions at each end of the range...

I have a target I set at 100 that I use to crank in my full 600 or 1000 elevations. It didn't work today. I will try your method next time. Thanks. Frank