Search results

What would be the minimum torque to prevent the brass to grow and move the neck forward? Or this dont happens?

My rear bag have short ears. For my stock seems that one with longer ears(rabbit) will be a better choice, as the botton of the stock is touching the botton of the rear bag, and not only the sides. The correct is only touch the sides, I read somewhere.

OK, guys. Thanks for your patience with me. Liseo

Maybe I was´t clear (or my english isn´t good enough) I know that the heavier bullet will deflect less with wind. But if the bullets are the same ? And that the light weight bullet have more accuracy potential when fired in slow twist barrel. But my question is ...with same bullet, one in...

Hi I posted this question in other forum, without any response. May be a dumb question? Suppose two identical rifles firing two same projectiles with the same speed and with exactly the same accuracy at a distance of 100 meters with no wind. The only difference is that one have 1/14 tw and...

OK, thanks GerryM

Will a 223 Remington 1/9 tw barrel stabilize bullets made with this jacket? FB and BT. Thanks *If this isn´t the right place to ask, would someone move it?

I always thought that cases grew more after annealing and shooting hot loads than without annealing, but I may be wrong.

Just to not open a new thread. What jacket lenght you guys recommend for 224'' bullets with 69 and 75 grains weight ? Will they stabilize in 1/9 tw 223 rifle? Thanks

Bozo699 I just turned down 50 6 BR case down to PPC rim diameter and the rifle worked flawlesss. Now the next step is to turn down 50 pieces for 30 BR barrel.

This weekend I will test the new barrel that I fitted to my rifle. This barrel was cut only one inch. As i asked this question after install the barrel, and be to lazy to redone the crown, lets see what happens. If the results arent good, I will cut another half inch. Now, to the range...

Soon I will fit a new barrel in my rifle, so how much should I cut in the crown end of the barrel? Is one inch enough? Thanks

OK guys, I think that the 30 BR will be the limit for this rifle. Caroby, my intention is just this, turn down the 30 BR and 6 BR rims for competition in score with the 30 and 600 yards with de 6 BR 1/8 tw. Thanks

Hello I have a BAT SB model 1,55" round diameter glued in MCM Edge stock in 6 PPC. Will this set up handle the stronger recoil of 30 BR or even 308 Winchester if I decide change the barrels (make a switch barrel gun)? Or this fixing method is only for low recoiling rifles? Thanks Liseo

When I resize with the Redding small base body die, they squeeze the shoulder to much and the case increase in length. After firing the shoulder measure .334" and after resizing they measure .329". Maybe send the case to Newlon/Harrels after tree firings is a good idea.

Jon, I sent you an e-mail. Liseo, from Brasil.

The 6 BR Norma is a good option for the Lapua? What the pros for Lapua?

This same thing happened with my PPC. I just ordered a new extractor and hope this solve my problem.

Can someone give me some information about Larry Blackmon? I ordered a .224 dies set one year ago, e-mailed him, but no response. He changed the adress or is out of business?

This is what I am doing. I have a BAT 6 PPC and one 30 BR barrel that will be fitted to this action. I will just rebate the ring in the 6 BR case and have fun...