Search results

You might try contacting Bob White at Shooters Corner in NJ, he has a huge inventory of 22's, also has a website which includes lists

What is the ideal twist for a 22-243 Wildcat with a 28" barrel?

I just acquired a couple of Ball end mills, one is 1-1/4", the other is 1". I need the shanks reduced to 3/4". I use DCMT 32.52 inserts and want to know what carbide hardness to look for. The mills are tool steel and can be scored with a file

I'd like to know what's involved in converting the Mauser 38 bolt from cocking on closing to cocking on opening

To protect a barrel I wrap a piece of brass or aluminum around the end of the barrel when chucking it in the lathe

crowning I have a lathe and have crowned barrels on it. In this case the barrels are already crowned and all I want to do is put a 11* bevel just slightly larger than the bore. If you guys think it should be done on a lathe let me know what speed and if I should use cutting oil Thanks all for...

I just bought a 11* muzzle crowning tool with a brass pilot from Brownells. I tried crowning a 22rf barrel by hand using light pressure . The result wasn't smooth, it looked like a fine chatter. The pilot fits snugly in the bore. Should I use a lubricant ?

What version Winchester 70 will a Canjar M70-2B trigger fit. I'm looking for one for pre 64 70

Anschutz 54 super match What barrel would fit an early Anschutz 54 Super Match? Are all 54 barrels interchangeable?

micro motion trigger The creep can be adjusted by the sear engagement screw and the trigger movement after firing can be adjusted by the overtravel screw

There's a DemBart electric checkering set listed on GB auction 594 192 474

how do you set up and use a barrel roll marking die

I'm looking at an Allen Bradley Powerflex 4M VFD model 22F-B012N103 for my Harrison 3 HP lathe. Anyone know anything about them?

Did it with carbide inserts, am amazed how well Delrin machines

I plan on making a couple of barrel spinners using 1" round Delrin stock and want some opinions on what tooling to use

I need opinions on this 5C collet chuck listed on Ebay auction 2716 6755 4173. Need opinions how how these type Collet holders compare to the Drawbar types. I don't intend to do production work

I want to match the Win sporter crown. I think some of the replies will help

What would be the best way to crown the muzzle on a 22rf sporter such as a Win 52 69 or 75 which is rounded?

I'm looking for a Drawbar and 5C collets for my Harrison M300 lathe. Aside from Harrison are there any other make of drawbar that will work?