Search results

I agree ......should be at least some less spread in velocity in good ammo or one would think so

That makes sense....thanks

Well.... I dont think it can hurt the strikes do look a bit deeper, I have done it to a couple of sporting rifles could not tell any difference in accuracy on paper. Might be different for a custom gun

Maybe someone will chime in on this subject, would be interesting to know

Is there any testing data out there about actual differences in accuracy or velocity when the rimfire firing pin strikes just inside the rim or if it crushes the outer rim ? I have searched quite a bit and have not found to much info on this subject, any input appreciated.

What does factory loaded Sako 22 PPC ammo go for these days? A guy at my club says he seen some sell for 75.00 box online.

Thanks for the info Mike, I was thinking that may not be quite enough, I checked the float with the rifle set up in a rest and used a piece of 0.20" cardboard and it was a close fit, the sides have more than 0.20" so ok there I think, I will shoot it more and see what happens, I was getting some...

How much clearance is enough between the barrel and stock when floated? Rifle in question is a 64 action Anschutz and has a wood stock and the clearance on this set up is about .020" best I can tell. The stock seems fairly stiff, what you guys think? Thank you.

What is a Sightron SII 6X42 HBR scope going for these days? Scope is question is excellent condition with the fine cross-hair. Are these good scopes for HBR competition or sporter class rimfire? Seller wants $200.00 shipped for the scope. Thanks.

Are the Sinclair windage rest tops good I have a older Hart pedestal that needs a new rest top. Are there other windage rest tops available that are better ?

How good are the older Leupold BR scopes with the locking AO ring ? , a local shop has one I am interested in, it is in excellent condition with the original box and all accessories, previous owner sent it in to Leupold about a year ago for service and they have the paperwork from Leupold as...

Picked up a nice used 1407 a while back, the rifle is bedded, I noticed whom ever did the bedding placed a small amount of bedding under the tapered nut right in front of the action , there is none under the barrel, is this the correct way to bed these rifles? I have not shot it yet so I don't...

Just wondering if the barrel on a factory rimfire sporter (with a pillar bedding job done) should be full free floated ? I am reading conflicting reports gunsmiths and online about this subject. I have always floated the barrels on rifles I have bedded. Am I missing something here ?

Thanks Evelio

I will check that out....thanks.....

It is not a press fit, any suggestions?

What is a good adhesive for gluing in a slip fit rim-fire barrel ? I have read where Loctite 271 is used for this purpose but I have never used it, your input appreciated.

After checking a few CZ rim-fire barrels with a bore scope I have noticed that there is an area of about 1/4 of the diameter of the bore that is covered with what looks like tiny pin holes for nearly the entire length of the barrel,one of these barrels was new also. Another thing I noticed in at...

I guess I could just re cut it with the Manson tool

Thanks for the reply I actually have one of those but was hoping not to do the entire crown just was wanting to touch up the bevel on the crown as it is a bit uneven, I don't know if lapping is the correct thing to do either,maybe it is I dunno. Hopefully someone will have some info on this