Search results

I have a new farley coaxial II being made for me and was wondering if the new base attached here would be superior/inferior for benchresting my 6br versus their standard base. I have a choice between this or the standard base. fyi, they are making an improved new rest top (coming out next week)...

The second set of rings look like the Kelbly's I just bought

thank you sir, advice well taken. best regards

thank you for the advice.

here is my logic. I can to some extent as a sniper feel/read the wind. If I could not - I do not believe the groups I shot at 300 yards would have been achieved without wind flags. that being said with a relatively steady, non gusting wind I was able to achieve some very good (certainly not...

thanks for the reply, as you can probably tell, my groups were not centered - but rather measured ctc. I really doubt that I could do better at 300 even if I had flags - the gun might but I probably couldn't. I agree on the wind flags at 300 for centered grouping but felt at 100 they were...

no wind flags, but only a 5-10 mph wind nt

ordered up some lapua match 223 brass to see what it would do for my rifles, put together some loads I found recommended here and went to the range today. here are my findings. the first rifle is a 223 richards custom (I have attached the spec sheet). I was able to do ~ 1.25" ctc with lake...

h322- I have an 8lb keg of 322. what do you recommend as a load under a 52 grain bullet ( I ordered 2000 barts )? than

thanks for the replies. as to custom bullets - any recommendations as to make and preference as to flat base or boat tail? "lol......if you can shoot an ag in the low 2's /sub 2's you are doing well" thanks, the rifle is crazy accurate - it's not me. I am not decrying my results but thought...

here are my load specs: lake city brass '02 brass, wolf primers, 26.9 grains of H335 and a 52 grain sierra bthp matchking moly bullet loaded to .005 off the lands brass is trimmed on my gracey and primer pockets are trimmed/uniformed

I bought a new .223 lh nesika br gun made by richards custom from the classifieds section here a little while back. shot it yesterday with the accuracy load from sierra using lake city '02 brass and 52 grain bthp sierra mk bullets. shot four 100yd/5shot groups with the best two coming in at...