Search results

Rob, I would first go ahead and true the action,then start setting your bolt timing and the clearance you want on the bolt handle. The timing is the most important. I have done alot of Dave's bolts and never had to cut any off the back of the bolts. If you cut the back of the bolt body you are...

I just thought that some of the other riflesmiths might find this funny too. Click on this link. Merry Christmas!! Boe http://www.youtube.com/watch?v=IPQM4h-UZtc&feature=related

Thanks for the help Tom

Has anyone had any problem with hangfires with 66gr H4831sc and 210m in cooler weather in the 7wsm? I am trying to get the ES down, I'm shooting 215m now. But had some concerns about hangfires before I try it. Thanks

Is your bolt timed properly? Check to see if the cocking piece is hitting the bolt body somewhere other than the bottom of the cocking cam. This happens when the bolt is under or over rotated.

safety lever You might want to check the sear safety cam hitting the cocking piece on the bolt with the safety off. I had a remington 700 in my shop a few months ago with the same problem. The safety lever pivot pin hole was drilled to low causing the safety to ride to high in the trigger...

I had a 700 come in my shop for a rebarrel and true the action. The rifle was and is going to be a 300WSM. After taking the rifle apart I noticed that the bolt lugs looked a little short, Indeed they were as they measured .424. So I call Remington to ask when are they below specs.They told me...

Has anyone ever taken the finish off a factory stainless trigger guard and floorplate? It looks like it is painted. I would like to if it can be polished to a bright shiny finish,but I dont know if it is cast alunimun or pot metal. Reps at Remington did'nt know. I did'nt want to take the finish...

Has anyone ever taken finish off a 700 BDL stainless floorplate? It looks like paint on it now. I`d like to know if it can be polished to a bright shiny finish. If so how did it turn out? Does anyone know if they are cast aluminum or pot metal?